687411

DeLonghi Eletta Cappuccino ECAM 45.766 Manual

21
Zoom out
Zoom in
Previous page
1/27
Next page
20
B
A
A B
44
7. Pour the descaler into the
tank up to level A (corre-
sponding to a 100 ml
pack) marked on the inner
surface of the tank (g.
44), then add water (1
litre) up to level B (g. 44)
and put the water tank
back;
45
2 l
8. Place an empty container
with a minimum capacity
of 2 litres under the cap-
puccino maker (C6) (g.
45);
Important! Danger
of burns
Hot water containing acid ows
from the cappuccino maker.
Avoid contact with splashes of
water.
9. Press the OK button to conrm that you have added the
descaler solution. The message “Descale underway” is dis-
played and the descaling procedure begins. The descaler
liquid comes out of the cappuccino maker and a series of
rinses and pauses is performed to remove limescale depos-
its from inside the machine;
After about 25 minutes, descaling stops and the messages
“RINSING” and “FILL TANK” alternate on the display.;
10. The appliance is now ready for rinsing through with clean
water. Empty the container used to collect the descaler
solution. Extract the water tank, empty, rinse under run-
ning water, ll with fresh water up to the MAX level and
put back in the appliance: “RINSING, Press OK” is displayed;
11. Place the container used to collect the descaler solution
empty under the cappuccino maker (g. 45);
12. Press the OK button to start rinsing. Hot water ows out
of the cappuccino maker and the message “RINSING Please
wait” is displayed.
13. When the water tank is empty, the messages “RINSING”,
“FILL TANK” and “REPLACE FILTER” (if previously removed)
alternate on the display. Empty the container used to col-
lect the rinsing water;
14. Remove the water tank, replace the water softener lter (if
previously removed), ll the tank up to the MAX level with
fresh water and insert it in the appliance: the display will
show “RINSING Press OK”.
15. Place the container used to collect the rinsing water empty
under the cappuccino maker and coee spouts (A7) (g.
45);
16. Press the OK button to resume rinsing. Hot water is deliv-
ered rst from the cappuccino maker, to continue and end
with the coee spouts and the message “RINSING Please
wait” is displayed.
17. When it nishes, the message “Rinsing complete, Press OK”
is displayed.
18. Press the OK button. The message “FILL TANK” is displayed;
19. Empty the drip tray, remove and top up the water tank
with fresh water to the MAX level and put back in the
machine.
Descaling is complete.
Please note!
• If the descaling cycle is not completed correctly (e.g. no
electricity) we recommend repeating the cycle.
• After descaling, it is normal for the grounds container
(A10) to contain water.
SETTING WATER HARDNESS
The DESCALE message is displayed after a period of time estab-
lished according to water hardness.
The machine is set by default for a hardness value of 4. The ma-
chine can also be programmed according to the hardness of the
mains water in the various regions so that the machine needs to
be descaled less often.
Measuring water hardness
1. Remove the “TOTAL HARDNESS TEST” indicator paper (C1)
from its pack (attached to the English instructions);
2. Immerse the paper completely in a glass of water for one
second;
3. Remove the paper from the water and shake lightly. After
about a minute, 1, 2, 3, or 4 red squares form, depending
on the hardness of the water. Each square corresponds to
one level.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi Eletta Cappuccino ECAM 45.766 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi Eletta Cappuccino ECAM 45.766 in the language / languages: English as an attachment in your email.

The manual is 3.51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi Eletta Cappuccino ECAM 45.766

DeLonghi Eletta Cappuccino ECAM 45.766 User Manual - German - 27 pages

DeLonghi Eletta Cappuccino ECAM 45.766 User Manual - Dutch - 20 pages

DeLonghi Eletta Cappuccino ECAM 45.766 User Manual - French - 21 pages

DeLonghi Eletta Cappuccino ECAM 45.766 User Manual - Polish - 22 pages

DeLonghi Eletta Cappuccino ECAM 45.766 User Manual - Spanish - 21 pages

DeLonghi Eletta Cappuccino ECAM 45.766 Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info