788660
10
Zoom out
Zoom in
Previous page
1/12
Next page
15
Please note:
Use De’Longhi descaler only
Under no circumstances should you use sulphamic or acetic
based descalers� Their use invalidates the guarantee�
Failure to descale the appliance as described also invalidates
the guarantee
1� Turn the appliance on and wait until it is ready for use
2� Empty the water tank (A12) and remove the water
softener lter (if present)�
3� Pour the descaler into the tank
up to the level A marked on the
back of the tank (equal to one
100ml packet), then add water
(1 litre) up to level B Place
an empty container with a
minimum capacity of 1�5 litres
under the cappuccino maker
4� Wait for the coee indicators to
come on�
Important! Danger of scalding
Hot water containing acid is delivered
from the cappuccino maker Avoid
contact with splashes of water
5� Press the button
and hold it down for at least
5 seconds to conrm that
you have added the solution and begin the descaling
procedure� The button indicator remains on to indicate
that the descaling programme has begun� The
indicator ashes telling you to turn the steam dial to the l
position�
6� Turn the steam dial anticlockwise to the I position�
Descaler ows out of the cappuccino maker and starts
to ll the container below The descaling programme
automatically performs a series of rinses and pauses to
remove all the scale� It is normal for several minutes of
inactivity to elapse between rinses�
After about 30 minutes, the water tank is empty and the
and ;indicatorsash.Turnthesteamdialclockwiseasfar
as it will go to the 0 position�
The appliance is now ready for rinsing through with clean
water
7� Empty the container used to collect the descaler solution
and replace it empty under the cappuccino maker
8� Remove the water tank, empty, rinse under running
water, ll with clean water and replace� The
indicator should be ashing
9� Turn the steam dial anticlockwise to the I position (g� 6)�
Hot water comes out of the spout�
10� When the water tank is completely empty, the
indicator ashes�
11� Turn the steam dial to the 0 position� The
indicator goes o
Fill the water tank again and the machine is ready for use
SETTING WATER HARDNESS
Descaling is necessary after a period of operation established
according to the water hardness set�
The machine is set by default for a hardness value of 4�
The machine can also be programmed according to the
hardness of the mains water in the various regions so that the
machine needs to be descaled less often�
Measuring water hardness
1. Remove the TOTAL HARDNESS TEST indicator paper
attached to this manual from its pack�
2� Immerse the paper completely in a glass of water for
about one second�
3� Remove the paper from the water and shake lightly
After about a minute, 1, 2, 3, or 4 red squares form,
depending on the hardness of the water Each square
corresponds to one level�
Level 1
Level 2
Level 3
Level 4
Set water hardness
1� Make sure the appliance is o (but connected to the mains
electricity supply and with the main power switch in the I
position);
2� Press the button and hold it down for at least
6 seconds� The indicators come on
together;
3� Press the button to set the actual water hardness
(as measured by the indicator paper)�
Level Level Level Level
1234
4� Press the button to conrm the selection�
The machine is now reprogrammed with the new water
hardness setting
B
A
A
B
A
B
10


Need help? Post your question in this forum.

Forumrules
1

Forum

delonghi-ecam-13.123

Reset search

  • Dear customer service,

    My DeLonge coffee machine repeatedly displays the same error when I select ground coffee. Despite following these troubleshooting steps, the issue remains (the coffee container light flashes, and the danger signal is on):

    1. **Check the Coffee Grounds**
    2. **Clean the Machine**
    3. **Check the Water Supply**
    4. **Reset the Machine**
    5. **Check for Blockages**
    6. **Consult the Manual** Submitted on 8-9-2024 at 11:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM 13.123 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM 13.123 in the language / languages: English as an attachment in your email.

The manual is 2.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM 13.123

DeLonghi ECAM 13.123 User Manual - German - 13 pages

DeLonghi ECAM 13.123 User Manual - Dutch, Danish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish - 195 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info