770085

DeLonghi DDSX 220WFA Manual

12
Zoom out
Zoom in
Previous page
1/88
Next page
12
FAST FLASHING
this means the “Home WLAN” has not been found
or has not been set.
“APP CONTROL” ICON
When the APP CONTROL icon appears
this means the last command was received via
Remote connection (e.g. APP).
If the saved “Home WLAN” setting needs to be changed, proceed
as follows:
1. Hold the button pressed for about 20 seconds until
a long beep is heard;
2. Use the app to set the new “Home WLAN” settings in the
unit.
5. CLEANING AND MAINTENANCE
• Always disconnect the appliance from the mains before
carrying out cleaning operations (g. 13).
• Never submerge the appliance in water.
5.1 Cleaning the cabinet
• Never pour water directly over the appliance (g. 14).
• Never use petrol, alcohol or solvents.
• Never spray insecticides or similar substances as these may
deform the plastic.
• Clean the surfaces of the appliance using a soft cloth and do
not use abrasive sponges as these may scratch the surfaces
themselves (g. 15).
5.2 Cleaning the dust or silver ion lter
The frequency of cleaning will depend on the frequency of use:
if used daily, it is recommended to clean the lter every week.
• Remove the lter housing cover (A9) from the appliance
(g. 16).
• Extract the dust lter (g. 17).
• Remove any dust from the lter using a vacuum cleaner
(g. 18).
• If the dust lter is very dirty, rinse it well with warm water.
The water temperature must not exceed 40° C.
• Leave it to dry completely, then put it back into place.
5.3 Replacing the HEPA-type (E12)* lter
The appliance will automatically remind you when the HEPA-
type (E12)* lter (A7) needs to be replaced. After a preset
number of operating hours, the display shows the blinking
symbol (C2) to indicate that the lter needs to be replaced.
Always use original De’Longhi lters.
• Remove the lter housing cover (A9) (g. 16).
• Extract the used lter (g. 19) and replace it with a new
one.
• Close the lter housing cover (with the dust lter (A8)
inserted).
• Reset the lter alarm by holding the button (B2)
pressed for at least 10 seconds until you hear a long beep.
Please note:
the symbol is intended only as a guide and it may be
necessary to replace the HEPA-type (E12)* lter more frequently,
depending on the air quality.
For long periods of downtime
• Disconnect the appliance from the mains and empty the
tank (A6).
• Clean the dust lter (A8) and re-insert it.
• Cover the appliance with a plastic bag to protect it from
dust.
6. TECHNICAL SPECIFICATIONS
Power supply voltage See rating plate
Input power “
Maximum input power “
Defrost device Yes
Hygrometer Yes
Fan speed 3
Air lter Yes
Frequency: 2400/2483.5 MHz
Maximum transmission power 10 mW
Operating limits:
Temperature 2°C - 30°C
Relative Humidity 30 - 90%
* Test by third party organisations of MPPS particles
according to EN 1822: 2010. Eciency for 2.5 m particles
at a rate of 80 m3/h - dehumidication and ltration active.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi DDSX 220WFA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi DDSX 220WFA in the language / languages: All languages as an attachment in your email.

The manual is 35.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info