770085
11
Zoom out
Zoom in
Previous page
1/88
Next page
11
Air ltration
If the HEPA-type (E12)* (A7) is installed, in addition to operating
in the preset mode, the appliance will also lter the air in the
room. In this case, the symbol (C2) will appear on the display.
The lter is designed to last up to 9 months, based on 8-hour
daily usage at medium working load.
To maintain the eciency of ltration, see paragraph “10.3
Replacing the HEPA-type (E12)* lter”.
4.1 Dehumidifying mode
1. Touch the button (B3). The symbol (C9) will
blink on the display (g. 7).
2. The display shows the previously set relative humidity
value. When the symbol blinks, the setting can be
changed by repeatedly touching the button.
There are 9 dierent relative humidity settings ranging
from 30% (dry environment) to 70% (humid environment).
Depending on the environmental conditions, it may not be
possible for the appliance to reach the minimum settable
value. In these cases, it is recommended the heat the
environment that needs to be dehumidied.
3. When the symbol stops blinking, the display shows the
percentage of relative humidity in the room. The appliance
may take a few seconds to display the value of the relative
humidity in the room.
4. When the room reaches the preset relative humidity level,
the appliance stops dehumidifying and operates at a very
slow ventilation speed.
4.2 Dry mode
1. Touch the button (B6). The display shows the
symbol (C7) (g. 8).
Please note:
The appliance automatically operates at the maximum
dehumidifying capacity. Recommended for particularly humid
environments or to dry laundry more quickly.
4.3 Ventilation mode
1. Touch the button (B2). The display shows the
symbol (C3) and the selected speed (g. 9).
2. When the symbol blinks, the ventilation speed can be
adjusted by repeatedly pressing the button. the
display shows the number corresponding to the selected
speed (1 LOW; 2 MED; 3 HIGH).
4.4 Swing function
1. Press the button (B5) . The air outlet louver (A1)
moves up and down, evenly distributing the air ow in the
room (g. 10).
2. To stop the louver in the desired position, touch the same
button again.
4.5 Timer function
The timer can be used to delay appliance start-up and shut-
down. This will avoid energy wastage, ensuring the appliance
operates only when needed.
The timer function can be programmed from either the control
panel or the app.
If programmed from the control panel: the display shows
the symbol (C12) (g. 11).
If programmed from the app: the display shows the
symbol (C11) (g. 12). To programme the timer from the
app, follow the instructions provided in the app.
How to programme delayed start-up
1. With the appliance in stand-by ( ), touch the
button (B7): the display will show the symbol and the
number relative to the selected hours (g.11);
2. Set the desired number of hours by repeatedly touching
the button.1, 2, 4, 6, 8, 12 hours can be selected.
3. After a few seconds, the appliance will return to stand-by
mode and the symbol will remain lit on the display.
4. After the programmed time, the appliance will turn on in
the previously set operating mode.
How to programme delayed shut-down
1. While the appliance is running, touch the button
(B7): the display shows the symbol and the relative
number of selected hours (g. 11);
2. Set the desired number of hours by repeatedly touching the
button. 1, 2, 4, 6, 8, 12 hours can be selected.
3. After a few seconds, the display returns to the current
operating mode and the symbol remains lit.
4. After the programmed time, the appliance will
automatically turn o.
Please note:
Once the timer has been programmed, to see the remaining
time until start-up or shut-down, touch the
button once.
To deactivate the timer function, press the button
twice. The symbol on the display will turn o.
4.6 Wi-Fi function
The appliance has a built-in Wi-Fi function. To activate or
deactivate this function, hold the button (B4) pressed
until the appliance emits two beeps. When the Wi-Fi function is
active, the display will show the Wi-Fi symbol (C5) with the
following operating modes:
-FIXED
this means the Wi-Fi functions are active and the
“Home WLAN” has been found
-SLOW FLASHING
this means the appliance is searching for the
“Home WLAN”
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi DDSX 220WFA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi DDSX 220WFA in the language / languages: All languages as an attachment in your email.

The manual is 35.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info