481717
47
Zoom out
Zoom in
Previous page
1/76
Next page
46
De Dietrich Gas 310/610 ECO
11.0 CONTROL AND SAFETY EQUIPMENT
11.1 General
The boiler is supplied with a standard set of defaults pre-programmed for normal operation but can be tailored by
the engineer to suit most site conditions. These values are set and read, using the built-in instrument panel or
with a laptop/computer or PDA (with optional software and interface).
For tamper proofing and security reasons the control has three levels of access:
1. User level - owner access
2. Service level - access with service code by qualified personnel
3. Factory level - access by PC with factory code
11.1.1 Instrument panel layout
The instrument panel consists of (see fig. 25):
1. Operating switch
2. PC/PDA connection for monitoring
3. Facility for incorporating a weather compensator
Fig. 25 Instrument panel
The functions of the keys and read-out windows (a-h) are explained below.
A summary of the key functions can be found in section 16.1 which is helpful when stepping through the
modes.
a. Code window:
Display at user level:
operating mode = only digit or letter
setting mode = digit or letter with steady
dot
read-out mode = digit or letter with
flashing dot
shut-off mode letter
forced mode = ‘HIGH’ letter
forced mode = ‘L°W’ letter
failure mode = flashing digit (current fault)
Display at service level:
failure mode = flashing digit (failure
memory)
counter mode = alternating + +
shut-off mode = alternating digit and dot in first
section
b. window displaying:
- temperatures
- settings
- shut-off or failure codes
c. reset key:
- reset/unlock key
d. key (mode key):
- program function; use this key to select the required
mode
e. Key (step key):
- program function; use this key t° select a parameter
within the mode
f. key (stare key);
- program function; increase setting
g. [+] k
ey:
-program function; increase setting
h. [-] key:
- program function; decrease setting
- switch function; manual or automatic °operation
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for De Dietrich Gas 310 ECO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of De Dietrich Gas 310 ECO in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info