Manual Datalogic PowerScan 7000 2D (page 21 of 28) (English)

535540

Zoom out

Zoom in

1/28

Troubleshooting

Quick Reference Guide 13

• Are enabled in the imager (see the Product Reference Guide for

more about symbologies).

Is the bar code displayed but not entered?

The bar code is displayed on the host device correctly, but you still have

to press a key to enter it (the Enter/Return or Tab key, for example).

You need to program a suffix. Programming a suffix enables the imager

to output the bar code data plus the key you need (such as “CR”) to

enter the data into your application. Refer to the Product Reference

Guide for further information.

Does the imager read the bar code incor-

rectly?

If the imager reads a bar code, but the data is not displayed correctly on

the host screen:

• The imager may not be programmed for the appropriate terminal

interface.

For example, you scan “12345” and the host displays “@es%.”

Reprogram the imager with the correct Plug and Play or Terminal

selection bar code. See

Plug and Play and/or the Product Reference

Guide.

• The imager may not be programmed to output your bar code data

properly.

For example, you scan “12345” and the host displays “A12345B.”

Reprogram the imager with the proper symbology selections. See

the Product Reference Guide.

The imager won’t read your bar code at all.

1. Scan the part number bar code in the back of this manual or the

samples from the Product Reference Guide. If the imager reads

sample bar codes, check that your bar code is readable.

Verify that your bar code symbology is enabled (see the Product

Reference Guide).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Datalogic PowerScan 7000 2D in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Datalogic PowerScan 7000 2D Manual

Product: