Manual Datalogic PowerScan 7000 2D (page 23 of 28) (English)

535540

Zoom out

Zoom in

1/28

Warranty

Quick Reference Guide 15

Datalogic ADC Limited Factory Warranty

Warranty Coverage

Datalogic ADC (“Datalogic”) hardware products are warranted against defects in material

and workmanship under normal and proper use. The liability of Datalogic under this war-

ranty is limited to furnishing the labor and parts necessary to remedy any defect covered

by this warranty and restore the product to its normal operating condition. Repair or

replacement of product during the warranty does not extend the original warranty term.

Products are sold on the basis of specifications applicable at the time of manufacture and

Datalogic has no obligation to modify or update products once sold.

If Datalogic determines that a product has defects in material or workmanship, Datalogic

shall, at its sole option repair or replace the product without additional charge for parts

and labor, or credit or refund the defective products duly returned to Datalogic. To per-

form repairs, Datalogic may use new or reconditioned parts, components, subassemblies

or products that have been tested as meeting applicable specifications for equivalent

new material and products. Customer will allow Datalogic to scrap all parts removed from

the repaired product. The warranty period shall extend from the date of shipment from

Datalogic for the duration published by Datalogic for the product at the time of purchase

(Warranty period). Datalogic warrants repaired hardware devices against defects in work-

manship and materials on the repaired assembly for a 90 day period starting from the

date of shipment of the repaired product from Datalogic or until the expiration of the orig-

inal warranty period, whichever is longer. Datalogic does not guarantee, and it is not

responsible for, the maintenance of, damage to, or loss of configurations, data, and appli-

cations on the repaired units and at its sole discretion can return the units in the “factory

default” configuration or with any software or firmware update available at the time of

the repair (other than the firmware or software installed during the manufacture of the

product). Customer accepts responsibility to maintain a back up copy of its software and

data.

Warranty Claims Process

In order to obtain service under the Factory Warranty, Customer must notify Datalogic of

the claimed defect before the expiration of the applicable Warranty period and obtain

from Datalogic a return authorization number (RMA) for return of the product to a desig-

nated Datalogic service center. If Datalogic determines Customer’s claim is valid, Data-

logic will repair or replace product without additional charge for parts and labor. Customer

shall be responsible for packaging and shipping the product to the designated Datalogic

service center, with shipping charges prepaid. Datalogic shall pay for the return of the

product to Customer if the shipment is to a location within the country in which the Data-

logic service center is located. Customer shall be responsible for paying all shipping

charges, duties, taxes, and any other charges for products returned to any other locations.

Failure to follow the applicable RMA policy, may result in a processing fee. Customer shall

be responsible for return shipment expenses for products which Datalogic, at its sole dis-

cretion, determines are not defective or eligible for warranty repair.

Warranty Exclusions

The Datalogic Factory Warranty shall not apply to:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Datalogic PowerScan 7000 2D in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Datalogic PowerScan 7000 2D Manual

Product: