500365

Dampcomat HWO1000 - 66603 Manual

21
Zoom out
Zoom in
Previous page
1/44
Next page
19
4.2 CLEANING
The strong waterbeam of the HWO 1000 can clean many objects. The high
pressure cleaner is suitable for cleaning for instance machines, floors, grids,
frontages, ships, lorries, etcetera. Some surfaces however need special treatment.
Therefore the following tip offs:
Special dirt needs special detergents: Greasy surfaces are best cleaned by hot
water and degreasing detergents. For normal dirt best use a regular cleansing
agent, for severe dirt better use an alkaline degreaser. Read the instructions of
the manufacturer thoroughly! To remove road-dust from cars, use a special car
shampoo. Remember that some detergents are rather agressive.
Therefore read the instructions on the label of the detergent. Protect yourself
with suitable clothing and masks.
If cleansing agents have to be thinned, care for a good and even mixture. This
is especially adviced for powder detergents. If not mixed well, it can cause
damage to machine and hoses or spouting gun. Spray the water and soap
mixture over the surface to be cleaned, leave it a few minutes, before you wash
it off with clean water.
Often the dirt has to be touched to remove it. Then a washingbrush or rotating
brush can be a very usefull accessory.
4.3 WARNING!
• Never spray with full pressure at animals or people. However, the cleaner can
be used to clean animals like cows, horses, pigs etc. Never spray them with:
- too hot water
- too high pressure
- a nozzle with an angle of 0 degrees.
To clean animals, use a nozzle with a wide angle, to reduce the pressure per
inch. This is also the fact with cars, boats etc, which are painted with (airbrush)
drawings or have stickers on it. Spouting with too high pressure can loosen
paintings or stickers.
• Remember that water conducts electricity. Therefore, never spray at electric
installations or machines, even when they are not working.
Danger of electrocution!
5.0 MAINTENANCE
Before starting maintenance to the machine, check:
- if electricity has been cut off.
- if pressure has been released from hoses and pipes by pulling the trigger of
the spouting gun.
Maintenance now can begin:
1. Weekly check the oil level. After the first 50 hours, oil must be drained and
refreshed. Turn out the drainplug (fig. 5;3A) and collect the oil. Then turn in
the plug and fill through black fillercap (fig. 5;2) on top of the pump. The right
oillevel is between the top of the oilglass and the red dot on it (fig. 5;3).
Refresh the oil after every 500 hours or 3 months. Right oiltype is SAE 85-90.
2. Clean tankfilter (fig. 3;194) and filleropening of the fuel tank every month.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dampcomat HWO1000 - 66603 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dampcomat HWO1000 - 66603 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info