643443
37
Zoom out
Zoom in
Previous page
1/1009
Next page
e Check to see if the valve rocker arms of the No. 1
cylinder are free or are being pushed. According
to the table below, check and adjust the valve
clearance, using a thickness gauge.
NOTE:
· The “O” mark denotes those valves that can be adjusted under that setting.
Valve Clearance (HOT)
Intake: 0.25 ± 0.05 mm
Exhaust: 0.33 ± 0.05 mm
(Reference)
Valve Clearance (COLD)
Intake: 0.18 mm
Exhaust: 0.25 mm
Tightening Torque (Lock nut): 16.7 - 22.6 N·m (1.7 - 2.3 kgf-m)
r Turn the crankshaft 360 degrees (one turn).
t Proceed to check and adjust the remaining valve clearances.
(8) Installation of cylinder head cover
q Wipe off the oil from the gasket attaching surface
of the cylinder head.
w Check the cylinder head cover gasket for evidence
of damage.
Replace the gasket, as required.
CAUTION:
· Install the cylinder head gasket in such a direction that
the identification mark may come at the intake side.
e Check the rubber grommets of the spark plug
tubes for evidence of damage.
Replace the rubber grommet, as required.
(For replacement of the rubber grommet, refer to
the EM section of the service manual.)
r Install the cylinder head cover gasket on the cylin-
der head.
NOTE:
· Install the cylinder head cover gasket in such a direc-
tion that the identification mark may come at the intake
side.
MA–19
JMA00051-00042
JMA00052-00000
JMA00053-00043
Pistion position
When valve rocker arms of No. 1 cylinder are free:
(Piston of No. 1 cylinder is at top dead center under compression stroke)
When valve rocker arms of No. 4 cylinder are free:
(Piston of No. 4 cylinder is at top dead center under compression stroke)
Inkate
Exhaust
Inkate
Exhaust
1234
!!
!!
!!
!!
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Daihatsu Terions J100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Daihatsu Terions J100 in the language / languages: English as an attachment in your email.

The manual is 41,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info