794476
75
Zoom out
Zoom in
Previous page
1/112
Next page
Combifort®
Inspectie en reparatie
25
Verklaring toegepaste symbolen
R weerstand
R min minimale weerstand
R max maximale weerstand
ohm
kΩ kilo ohm (x 103)
MΩ mega ohm (x 106)
< kleiner dan
> groter dan
Kamerthermostaat in gesloten stand
Meetwaarde tussen K1 pin 1 en 2:
R < 100 Ω correct
R > 100 Ω foutief
Indien de meting een fout aangeeft dan:
- bedrading naar kamerthermostaat con-
troleren
- kamerthermostaat controleren
Kamerthermostaat in geopende stand
Meetwaarde tussen K1 pin 1 en 2:
R > 1 kΩ correct
R < 1 kΩ foutief
Indien de meting een fout aangeeft dan:
- bedrading naar kamerthermostaat controleren
- kamerthermostaat controleren
Cv-waterdruksensor
De cv-waterdruksensor kan niet door een weerstandsmeting gecontroleerd worden.
Modulerende kamerthermostaat
Deze modulerende thermostaat kan niet door een weerstandsmeting gecontroleerd worden [8.1].
Temperatuursensoren en selectiesensor
De werking van een sensor kan gecontroleerd worden met behulp van een universeel- of
ohmmeter. Bij controle van de temperatuur is eveneens een temperatuurmeter nodig. Ga hiermee
als volgt te werk (zie ook figuur 7):
a. Neem connector K4 uit de regelunit,
b. Meet op de draadboomconnector de weerstand van de vermoedelijk defecte sensor,
c. Haal de betreffende sensor bij de cv-buis of bij de boiler los,
d. Wikkel de losgenomen sensor samen met de voeler van de temperatuurmeter in een doek,
e. Wacht totdat de temperatuur stabiel is en meet tenslotte de weerstand,
Bij een goede sensor dienen de volgende weerstandswaarden (± 1%) over pin 1 en 2, en over pin
3 en 4 gemeten te worden:
bij 10 °C; 887 Ω bij 25 °C; 1000 Ω
bij 15 °C; 921 Ω bij 30 °C; 1039 Ω
bij 20 °C; 961 Ω bij 35 °C; 1078 Ω
07.98.91.853.0
LET OP!
Voor u gaat meten:
neem de lichtnetsteker uit
de wandcontactdoos,
zet de universeel- of ohm-
meter in de stand ‘weerstand
meten,
neem de betreffende
draadboomconnector uit de
regelunit zie [2.1],
meet op de draadboom-
connector, voorbeeld zie
figuur 7.
figuur 7: Inspectie boilersensor
beeldpag_25.eps
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Daalderop COMBIFORT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Daalderop COMBIFORT in the language / languages: Dutch as an attachment in your email.

The manual is 4.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Daalderop COMBIFORT

Daalderop COMBIFORT Installation Guide - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info