Manual Cubify CubeX (page 14 of 37) (English)

534695

Zoom out

Zoom in

1/37

1. Scroll to the LEVEL menu and select. (Fig. 26) Tap on the clockwise and

counterclockwise position and observe the print jet’s print jet tip moves around the

print pad from the side of pad. (Fig. 27)

2. After checking that all axes are functioning properly, use the control button to go

back to the main menu. If adjustments are required to the print plate or the print jet

tips, refer to “CubeX Maintenance: Leveling Print Plate.”

INSTALLING THE PRINT PAD

1. Scroll to the “MOVE” function screen located on the CubeX control panel. (Fig. 23)

Fig. 23

Fig. 24

Fig. 26

Fig. 27

Fig. 25

CHECKING THE X,Y,Z AXIS

During shipping your CubeX, the X, Y and Z axes may have come out of alignment. Before starting your rst creation, please

verify that the X, Y and Z axes are aligned.

X, Y, Z Axis Movements:

• X Axis: Print Jet moves front to back and back to front.

• Y Axis: Print Jet moves left to right and right to left.

CAUTION: Always move the print plate (Z Axis) down rst to avoid collision

with the print jet tips. When moving the print jet (X and Y axis), make sure

you do not stray too far from the home switches (left rear of the printer)

as this can cause collision with the printer frame. Excessive collisions will

damage the printer.

2. Using the Up and Down arrows on the right side of the screen, move the Aluminum

Print Plate to its lowest position.(Fig. 24)

3. To install the Print Pad, align the aluminum foot with front slot on the Print Plate base.

(Fig. 25)

4. Place the Print Pad into position, when properly installed the magnet will lock it in

place. Ensure that print pad is fully seated. (Fig. 25)

MOVE

LEVEL

Z GAP

OFFSET

LEVEL BED

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cubify CubeX in the language / languages: English as an attachment in your email.

The manual is 4,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cubify CubeX Manual

Product: