648532
7
Zoom out
Zoom in
Previous page
1/8
Next page
EN • 9
EN
CHARGING PROGRAMS
Choose program by pressing the MODE-button.
Adjust parameters according to "CHARGING" (6–9).
Press START/STOP button to start the selected program.
The table explains the different Charging Programs:
Program
Battery Size
(Ah)
Explanation Temp range
NORMAL
20–1200Ah

Use for GEL, WET and MF batteries.

(-F+122ºF)
AGM
20–1200Ah

Use for most AGM batteries. Some AGM should use lower voltage
(NORMAL Mode), check battery manual if unsure.

(-F+122ºF)
Ca/Ca
20–1200Ah

Use for Ca/Ca batteries. Use Ca/Ca program to maximize charge with
minimum loss of fluid. Including RECOND step. Recond your battery once
per year and after deep discharge to maximise lifetime and capacity.

(-F+122ºF)
BOOST
20–1200Ah

Used for recovery of stratified batteries.

(-F+122ºF)
SUPPLY
20–1200Ah

Use as power supply or use for float maintenance charging when 100%
capacity of the battery is required. SUPPLY program activates step 7 without
time or voltage limitation.

(-F+122ºF)
WARNING!
Risk of short circuiting the battery cables. Connect charger cables
to the charger before connecting the battery
WARNING!
Risk of electrical shock if touching positive and negative terminals
when charging
•Usinghighercurrentthanrecommendedmayresultinbatteriesnotbeing
completely charged.
•Usinglowercurrentthanrecommendedwillprolongthechargingtime.
•Thecurrentsarethemaximumrecommendedcurrentforbatterycharg
-
ing. If a parallel consumer is connected then the current setting could be
increased with this current value.
•Somebatterymanufacturercouldrecommenddierentvalues.Please
check with the manufacturer if uncertain. The main recommendations are
that Gel batteries should be charged in the lower current range, Power
AGM’s in the upper range and most other battery types in the mid-range.
Model number 1069
Rated Voltage AC 220–240VAC,50–60Hz,3.0A
Charging voltage 14.4V/14.7V/15.8Vand28.8V/29.4V/31.6V
Start voltage 2.0V
Output Selectable, max 40A/12V or 20A/24V
Back current drain* Less than 1Ah/month
Rippl e** Less than 4% of actual DC current
Ambient
temperature
-20°C to +50°C
(-4°F to +122°F)
Charger type 8 step fully automatic charging cycle
Battery types All types of 12V and 24V lead-acid batteries
(WET, MF, Ca/Ca, AGM and GEL). Check
with your battery supplier for appropriate
charge information
Battery capacity 12V: 20–1200Ah, 24V: 10–600Ah
Dimensions 254 x 160 x 76mm (L x W x H)
Insulation class IP20
Weight 1.3kgwithoutchargecable
Warranty 2 years
*) Back current drain is the current that drains the battery if the charger is not connected
to the mains. CTEK chargers have a very low back current.
**) The quality of the charging voltage and charging current is very important. A high
current ripple heats up the battery which has an aging effect on the positive electrode.
High voltage ripple could harm other equipment that is connected to the battery. CTEK
battery chargers produce very clean voltage and current with low ripple.
TECHNICAL SPECIFICATION
LIMITED WARRANTY
CTEK SWEDEN AB, issues this limited warranty to the original purchaser of
this product. This limited warranty is not transferable. The warranty applies
to manufacturing faults and material defects for 2 years from the date of
purchase. The customer must return the product together with the receipt
of purchase to the point of purchase. This warranty is void if the battery
charger has been opened, handled carelessly or repaired by anyone
other than CTEK SWEDEN AB or its authorised representatives. The
charger is sealed. Removing or damaging the seal will void the warranty.
CTEK SWEDEN AB makes no warranty other than this limited warranty and
is not liable for any other costs other than those mentioned above, i.e. no
consequential damages. Moreover, CTEK SWEDEN AB is not obligated to
any other warranty other than this warranty.
12V 24V
Current Battery size Min Battery size Max Current Battery size Min Battery size Max
10A 20Ah 300Ah
  
20A 40Ah 600Ah
  
30A 60Ah 900Ah
  
40A 80Ah 1200Ah
  
7


Need help? Post your question in this forum.

Forumrules
1

Forum

ctek-mxts-40

Reset search

  • My charger gets to second stage then shows error 09 the general error light comes on as does the one next to stop start switch.....the batteries arnt 12 months old Submitted on 24-8-2018 at 22:12

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ctek MXTS 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ctek MXTS 40 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ctek MXTS 40

Ctek MXTS 40 User Manual - German - 16 pages

Ctek MXTS 40 User Manual - Dutch - 8 pages

Ctek MXTS 40 User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info