648532
6
Zoom out
Zoom in
Previous page
1/8
Next page
8 • EN
MODE
START
STOP
STOP
SUPPLY
BOOST
Ca/Ca
AGM
NORMAL
SET
1 2 3 4 5 6 7 8
12V/40A
24V/20A
MXTS 40
MODE
START
STOP
STOP
SUPPLY
BOOST
Ca/Ca
AGM
NORMAL
SET
1 2 3 4 5 6 7 8
12V/40A
24V/20A
MXTS 40
MODE
START
STOP
STOP
SUPPLY
BOOST
Ca/Ca
AGM
NORMAL
SET
1 2 3 4 5 6 7 8
12V/40A
24V/20A
MXTS 40
INDICATION LAMPS, DISPLAYS
AND ERROR CODES
SETTINGS BEFORE START:
DISPLAY (V)
Indicates voltage set
Options: 12
/
24Volts

Indicates voltage set
Options: 13,6
/
14,0
/
14,4
/
14,8V in 12V setting
Options: 27,2
/
28,0
/
28,8
/
29,6V in 24V setting
DISPLAY (A)
Indicates current set
Options: 40
/
30
/
20
/
10A in 12V setting
Options: 20
/
15
/
10
/
5A in 24V setting
DISPLAY (h)
Indicates which parameter to set
Options: V
/
SV
/
A
/
T
/
RT[h]
V = Nominal Voltage
SV = Supply Voltage
T = Temperature compensation
RT[h] = Recond time in BOOST program
DISPLAY (h) + (Ah & info)
Displays error codes
A = Current limit
REAL TIME INDICATION DURING CHARGING:
DISPLAY (V)
Displays output voltage
DISPLAY (A)
Displays output current
DISPLAY (h)
Alt. 1. Displays total elapsed charging time (minutes/hours)
Alt. 2. Displays time elapsed until error occured
Alt.3.Displayserrormessage
DISPLAY (Ah & info)
Alt.1. Displays total charge delivered since start (minutes/hours)
Alt.2. Displays error codes together with ERROR lamp
ERROR CODES:
E01
REVERSE POLARITY
Connect the charger according to “quickguide”.
E02
OVER VOLTAGE
Battery voltage too high for the chosen charging program, check
battery voltage.
E03
TIME OUT STEP 1: DESULPHATION
Restart the charger. If charging is still being interrupted the bat-
tery is seriously sulphated and may need to be replaced.
E04
TIME OUT STEP 2: SOFT START
Restart the charger. If charging is still being interrupted the battery
can not accept charge and may need to be replaced.
E05
STEP 5: ANALYSE
Restart the charger. If charging is still being interrupted the bat-
tery cannot retain charge and may need to be replaced.
E06
BATTERY OVERHEATED
The battery is too hot to charge. The battery is damaged and
may need to be replaced.
E07
LOW BATTERY VOLTAGE IN SUPPLY PROGRAM
Battery voltage too low or too large consumers connected. Check
if 12V battery connected in 24V battery setting or disconnect
large consumers.
E08
HIGH CURRENT IN SUPPLY PROGRAM
Check if clamps are short circuited or connected reversed polarity.
E99
OVER VOLTAGE PROTECTION
If battery voltage is below 17V the ERROR lamp is lit when 24V
setting has been selected.
Alt 1. Press START/STOP button to charge with 12V setting.
To set the parameters for customized charging proceed with
“CHARGING” step 6 to 9.
Alt 2. Press INCREASE button to change to 24V setting. Press
START/STOP button to resume. To set the parameters for custom
-
ized charging proceed with “CHARGING” step 6 to 9.
12V
0.00h
24V
Error:
40A
0Ah
20A
E07
INDICATION LAMPS:
MODE
START
STOP
STOP
SUPPLY
BOOST
Ca/Ca
AGM
NORMAL
SET
1 2 3 4 5 6 7 8
12V/40A
24V/20A
MXTS 40
POWER LAMP
Power connected and switched on.
MODE
START
STOP
STOP
SUPPLY
BOOST
Ca/Ca
AGM
NORMAL
SET
1 2 3 4 5 6 7 8
12V/40A
24V/20A
MXTS 40
GENERAL ERROR LAMP
An error has been detected.
MODE
START
STOP
STOP
SUPPLY
BOOST
Ca/Ca
AGM
NORMAL
SET
1 2 3 4 5 6 7 8
12V/40A
24V/20A
MXTS 40
POLARITY ERROR
Reversed polarity or short circuit in charge cables error.
MODE
START
STOP
STOP
SUPPLY
BOOST
Ca/Ca
AGM
NORMAL
SET
1 2 3 4 5 6 7 8
12V/40A
24V/20A
MXTS 40
BATTERY ERROR
Battery temperature error. The battery is too hot to charge.
MODE
START
STOP
STOP
SUPPLY
BOOST
Ca/Ca
AGM
NORMAL
SET
1 2 3 4 5 6 7 8
12V/40A
24V/20A
MXTS 40
BATTERY VOLTAGE ERROR
Overvoltage error on battery connection.
6


Need help? Post your question in this forum.

Forumrules
1

Forum

ctek-mxts-40

Reset search

  • My charger gets to second stage then shows error 09 the general error light comes on as does the one next to stop start switch.....the batteries arnt 12 months old Submitted on 24-8-2018 at 22:12

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ctek MXTS 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ctek MXTS 40 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ctek MXTS 40

Ctek MXTS 40 User Manual - German - 16 pages

Ctek MXTS 40 User Manual - Dutch - 8 pages

Ctek MXTS 40 User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info