648532
4
Zoom out
Zoom in
Previous page
1/8
Next page
6 • EN
MODE
START
STOP
STOP
SUPPLY
BOOST
Ca/Ca
AGM
NORMAL
SET
1 2 3 4 5 6 7 8
12V/40A
24V/20A
MXTS 40
INCREASE BUTTON
DISPLAY (A)
12V
0.00h
40A
0Ah
DISPLAY (Ah & info)
SET-BUTTON
DISPLAY (h)
DISPLAY (V)
NORMAL PROGRAM
DECREASE BUTTON
MODE-BUTTON
START/STOP-BUTTON
REVERSED POLARITY
BATTERY TEMPERATURE
OUT OF RANGE
OVERVOLTAGE ERROR
AGM PROGRAM
Ca/Ca PROGRAM
BOOST PROGRAM
SUPPLY PROGRAM
CHARGING
For best possible charging of your batteries the voltage and current is
adjustable. In addition temperature compensated charging is selectable.
See below how to set the parameters for customized charging.
1. Connect the charger cables to the charger
(see quickguide).
2. Connect the charger to the battery
(see quickguide).
3. Connect the charger to the mains supply
4. Turn on the mains switch
The power lamp will indicate that the mains cable is connected to the
mains supply. The error lamp will indicate if the battery clamps are
incorrectly connected. The reverse polarity protection will ensure that
the battery or charger will not be damaged.
5. Press the MODE-button to select charging program
6. Press SET-button to set parameters
7. Select voltage
Display (h) will indicate that voltage (
V
) is selectable.
Display (V) will flash and indicate set voltage.
Press +/- to change.
Press SET-button to confirm.
8. Select current
Display (Ah & info) will indicate that current (
A
) is selectable.
Display (A) will flash and indicate set current.
Press +/- to change.
Press SET-button to confirm.
9. Select temperature compensation
•Display (h) will indicate that temperature compensation (
T
) is
selectable.
Display (Ah & info) will indicate On
/
Off.
Press +/- to change.
Press SET-button to confirm.
10. Press the START/STOP-button to start charging cycle
or press MODE-button to change charging program
11. Follow the 8-step display through the charging
process
The battery is ready to start the engine when STEP 4 is lit. The battery
is fully charged when STEP 7 is lit.
12. Stop charging at any time by pressing the
START/STOP-button
13. Press START/STOP-button to start charging cycle
POWER LAMP
ERROR LAMP
4


Need help? Post your question in this forum.

Forumrules
1

Forum

ctek-mxts-40

Reset search

  • My charger gets to second stage then shows error 09 the general error light comes on as does the one next to stop start switch.....the batteries arnt 12 months old Submitted on 24-8-2018 at 22:12

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ctek MXTS 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ctek MXTS 40 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ctek MXTS 40

Ctek MXTS 40 User Manual - German - 16 pages

Ctek MXTS 40 User Manual - Dutch - 8 pages

Ctek MXTS 40 User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info