772438
25
Zoom out
Zoom in
Previous page
1/44
Next page
19
19
20
21
22
17
18
9
CroozerSkiSet16-D-9-15
Installing and removing the Croozer Ski Set
Kid
bar into the angled bar. The stickers on the two bars
should be facing the same direction. There are two
insertion positions (15, 16); begin by using the  rst
position (15). The other position is for adjusting the
tow-bar length. For more information, see “Adjusting
the harness and tow bars” on page 10.
9. Follow the same steps for attaching the second exten-
sion bar on the left side. When inserting the second
left extension bar into the  rst, the two “L 2” stickers
should be facing the same direction. This bar also has
two possible insertion positions (17, 18); begin by us-
ing the  rst position (17).
10. Follow the same steps to attach the extension bars on
the right side of the Croozer.
After assembling the tow bars, be sure to check that they
are locked securely together. This can be done by pulling
on the bars without squeezing the buttons. It should not
be possible to pull out the extension bars without squeez-
ing the buttons. Using the Ski Set with tow bars that have
not been locked securely together could cause accidents
with serious injury or death.
Step E: Attaching the harness system to the
tow bars
Elastomer shock absorbers (19) with integrated tow-bar
connectors are permanently attached to the left and right
sides of the waist harness.
Tip: There are two ways of attaching the harness system
to the tow bars. One option is to first attach the har-
ness system to the tow bars on the ground and then
buckle the harness around your waist. The second
option is to first buckle the harness around your
waist and then attach the tow bars by lifting them to
your waist and inserting the connectors. We recom-
mend using the first method in the beginning so
that you can familiarise yourself with the attachment
procedure.
1. Place the harness system on the ground in front of the
tow bars, ensuring that the opening of the harness is
facing in the direction of travel (i.e. towards the front)
and the shoulder straps are at the top of the harness.
2. Squeeze the two side buttons (20) on the left elas-
tomer shock absorber (19) using your thumb and
fore nger and insert the connector into the left tow bar.
The end of the left towbar is marked “L 3” (21). Insert
the connector until it locks into place in the hole (22) in
the tow bar.
3. Repeat these steps to attach the second elastomer
shock absorber.
After the elastomer shock absorbers have been con-
nected to the tow bars, be sure to check that the connec-
tion is secure. This can be done by pulling on the shock
absorbers without squeezing the buttons. It should not
be possible to pull out the connectors without squeezing
the buttons. Using the Ski Set with tow bars that have not
been locked securely together could cause accidents with
serious injury or death.
EN
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Croozer Ski-Set at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Croozer Ski-Set in the language / languages: English, German, French as an attachment in your email.

The manual is 1.59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info