772438
23
Zoom out
Zoom in
Previous page
1/44
Next page
1
2
3
54
6
7
7
8
7
CroozerSkiSet16-D-9-15
Installing and removing the Croozer Ski Set
Kid
Step B: Attaching the skis to the ski adapters
1. Make sure that the ski bindings are adjusted to a boot-
sole length of 235 mm (9.25 inch).
2. The tension of the ski bindings must be adjusted to the
maximum release/retention setting because, if the set-
ting is to low, the skis could come loose or fall off while
the trailer is in use. Have the release setting of the ski
bindings adjusted by a professional ski shop. Be sure
to follow the instructions given in the manual for your
ski bindings.
After removing the ski adapters, be sure to have your
ski bindings readjusted to the skier by a professional ski
shop. Using skis with incorrectly adjusted ski bindings
could cause accidents with serious injury or death.
3. The ski adapters are marked with the letters “L” and
“R”. Attach the left ski adapter to the left ski by  rst
slipping the front plate (1) of the adapter into the front
of the binding and then pressing down on the heel
plate (2) to lock the adapter into the binding. Use the
same procedure to attach the right adapter to the right
ski.
Tip: Pulling up on the heel lever of the binding will make
it easier to lock in the adapter.
Step C: Attaching the ski adapters to the
Croozer Kid or Kid Plus
The ski adapters are equipped with push-button axles.
When you press the button (3), the retaining balls (4) that
lock the axles into the receivers will retract within the axle.
The adapters with skis cannot be attached or removed un-
less the button is pressed. The heel plates of the ski adapt-
ers are marked with the letters “L” and “R”. Be sure to
mount each ski adapter to the correct side of the Croozer.
1. Use one hand to lift up the back of the Croozer Kid or
Kid Plus.
2. Press the button (3) of the adapter axle.
3. Croozer Kid Plus: Insert the adapter axle (5) all the
way into the axle receiver (6) in the suspension swing
arm of the Croozer Kid Plus, and release the button.
Croozer Kid: Insert the adapter axle (5) all the way into
the axle receiver in the frame of the Croozer Kid, and
release the button. (Not pictured)
4. Now check that the ski adapter is securely locked into
the receiver by pulling on the adapter without pressing
the button. It should not be possible to remove the ski
adapter.
5. Repeat these steps to attach the second ski adapter.
After the ski adapters have been attached, be sure to
check that they are both locked securely into the axle
receivers. This can be done by pulling on the ski adapt-
ers without pressing the buttons. It should not be possible
to remove the ski adapters unless you are pressing the
buttons. Ski adapters that are not securely locked into
the axle receivers could fall off while skiing, resulting in
accidents with serious injury or death.
EN
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Croozer Ski-Set at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Croozer Ski-Set in the language / languages: English, German, French as an attachment in your email.

The manual is 1.59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info