772438
24
Zoom out
Zoom in
Previous page
1/44
Next page
10
9
7
12
1
10
11
9
13
14
15
16
13
8CroozerSkiSet16-D-9-15
Installing and removing the Croozer Ski Set
6. To remove the ski adapters, follow these instructions
in the reverse order. Press the button (3) on the axle,
and pull the adapter out of the axle receiver.
Step D: Attaching the tow bars to the Crooz-
er Kid or Kid Plus
The Ski Set comes with two angled (7) and four straight
(8) bars. The angled bars are attached to the respective
brackets (9) on the Croozer Kid or Kid Plus. These bars
are attached to the frame in the same way as the hitch arm
or Stroller wheel arms. One angled bar is mounted to the
hitch-arm attachment bracket on the left side of the frame,
and the other, to the wheel-arm attachment bracket on the
right side of the frame (relative to the direction of travel).
The angled bars are marked “L 1” and “R 1”.
1. Lift the front of the Croozer Kid or Kid Plus.
2. Pull the security pins (10) out of both attachment brackets.
Tip: Position each angled bar so that it curves inward,
ensuring that the hole (11) in the left bar is facing
upwards. The angled bar for the right side of the
Croozer has no hole.
3. Hold the left angled bar (7) at an approx. 45° angle to
the hitch-arm attachment bracket (9). The hole (11) in
the angled bar must be facing upwards.
4. Guide the retaining bolts (12) at the end of the angled
bar gently into the slots of the attachment bracket.
5. Then fold the angled bar upwards into the attachment
bracket until the bolts (12) of the bar are fully engaged
in the slots of the attachment bracket.
Do not let the strap of the security pin get caught be-
tween the angled bar and attachment bracket as this
could damage the strap.
6. Insert the security pin (10) as far as it will go through
both holes of the attachment bracket. The head of the
security pin is magnetic and will adhere to the attach-
ment bracket.
Tip: If you are using an older Croozer Kid or Croozer Kid
Plus model, the bracket may have a wire-lock pin
instead of a ball-lock pin.
Always check that the security pin has been inserted as
far as it will go and that it cannot fall out. If the security
pin is not properly inserted, the angled bar could fall off
while in use, resulting in accidents with serious injury or
death.
7. Follow the same steps to mount the second angled
bar to the right side of the Croozer.
8. Now you can attach the extension bars (8). The
somewhat longer and thinner bars are attached to the
angled bars. When mounting the bars, pay attention to
the respective stickers. The left extension bar and left
angled bar are both marked with “L 1” (13). Squeeze
the two side buttons (14) on the extension bar using
your thumb and forenger and insert the extension
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Croozer Ski-Set at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Croozer Ski-Set in the language / languages: English, German, French as an attachment in your email.

The manual is 1.59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info