772448
15
Zoom out
Zoom in
Previous page
1/32
Next page
13
CroozerCargo20-ENG-9-19
Preparing the Croozer Cargo for Use as a Bicycle Trailer
3
N-m
Installing the axle hitch to a bicycle with a solid axle
1. Remove the axle nut (1) on the left side of the solid
axle by turning it anticlockwise.
It is vitally important that you leave the retaining washer
(2) on the axle. This washer prevents the axle from rotat-
ing in the dropouts. Riding without the retaining washer
can result in accidents with serious injury or death.
2. Without removing the retaining washer, place the axle
hitch (3) onto the axle by feeding the end of the axle
through the hole in the hitch.
3. Screw the axle nut (1) back onto the solid axle, tight-
ening at least ve full turns.
The axle nut must engage the threads for at least five
full turns in order to ensure adequate clamping force for
holding the rear wheel securely. Failure to tighten the nut
adequately may result in accidents with serious injury or
death. If it is not possible to tighten the nut at least 5 full
turns, then the axle is too short, and the Universal Hitch
cannot be used! Consult a professional bicycle mechanic
for the appropriate parts and assistance.
4. Check that the rear wheel of the towing bicycle is prop-
erly centred, adjusting the position if necessary; then
tighten the axle nut using the tightening torque specied
in the owner’s manual of the towing bicycle. Be sure to
hold the axle hitch in place while tightening the nut.
5. Finally, hold the rear wheel with both hands and try to
rock it back and forth to check that the wheel is held
securely in the dropouts.
The rear wheel of the towing bicycle must be properly in-
stalled after the axle hitch has been mounted. Riding with
an improperly installed rear wheel can result in accidents
with serious injury or death. Be sure to follow the instruc-
tions given in the owner’s manual of the towing bicycle.
When in doubt, consult a professional bicycle mechanic.
Tip: If there is not enough space for mounting the axle
hitch or if the threads of the axle are too short, then
you can replace the original axle nut with a Croozer
Click & Crooz Axle Nut Hitch, which is available as
an accessory.
min. 5 x
3
1
2
1
Accessory
www.croozer.com
www
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Croozer Cargo - 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Croozer Cargo - 2020 in the language / languages: English as an attachment in your email.

The manual is 4.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Croozer Cargo - 2020

Croozer Cargo - 2020 User Manual - German - 32 pages

Croozer Cargo - 2020 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info