736873
13
Zoom out
Zoom in
Previous page
1/44
Next page
13GB/IE
CAUTION! RISK OF INJURY!
Never assemble or dismantle the product in
strong winds.
Select the most stable and level surface possi-
ble to assemble the product.
Sandy surfaces reduce stability. Make sure
you choose a surface that offers a firm grip for
the tent pegs.
Never hammer the tent pegs into the ground
with force! If necessary extend the guy ropes
with the help of a loop and place the tent
pegs at a different location.
Check regularly that all connection points are
undamaged and check the guy ropes and the
stability of the tent pegs.
An incorrect assembly sequence could cause
damage to the product.
Any liability is excluded.
CAUTION! RISK OF POISONING
AND RISK OF DAMAGE TO
PROPERTY!
Do not light fire inside the product and keep it
away from heat sources.
Precautionary measures against fire are
shown on the label that is sewn to the inside of
the tent. We recommend you do not remove
this label.
In addition to this familiarise yourself with
the fire safety regulations on site (e.g. at the
camping ground, tent site).
Keep the exit free! Do not block the exit with
objects.
All inflatable products are sensitive to cold.
Therefore never unfold or inflate the product
at temperatures below 15 °C!
If the air pressure increases in direct sunlight
then this must be offset accordingly by relea-
sing air.
Do not open the zip fastener when the frame
is inflated in order to avoid deformation and
tearing of the frame.
Please ensure that the product is not brought
into contact with stones, gravel, or pointed
objects – particularly when inflated – and that
it does not drag or rub anywhere as this could
cause damage to the material.
Only insert suitable pump adaptors into the
safety valve.
Otherwise the valves could be damaged.
Do not inflate the product too much as there
is a risk that the welded seams will tear. Close
the valves well after inflating.
Make sure there is sufficient ventilation when
using gas and combustion apparatus outside
the product. Otherwise gases could collect
inside the product.
Please ensure that the ventilation openings are
open at all times in order to ensure a high rate
of air exchange.
Please pay attention to the weather
and to atmospheric influences
When selecting a location please always ob-
serve the site conditions and how these could
change.
Could the location be flooded if it rains? Pay
attention to any possible changes in river level
or tides.
Protect the product from strong wind and
storms. Place the product where it is best
protected from the wind.
Exchange the normal tent pegs for special
storm tent pegs in advance of strong winds.
Ask a specialist retailer for information on
useful supplementary products.
Dismantle the product in advance of heavy
snow or storm.
Remove snow from the product.
Otherwise the product could collapse under
the weight.
Do not set the product up too tightly as it will
not be able to adapt to changing weather
conditions and could be damaged.
Zip fasteners are wear parts and are not
covered in the guarantee conditions.
The polyester material is coated in PU and is
thus water-repellent.
The tent fabrics stretch to different extents in
moisture and rain and necessitate the tigh-
tening of the guy ropes. When the material
tightens again while it dries the guy ropes
need to be loosened again in good time.
Do not use insect spray in or on the product.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crivit ZA-3160 IAN 285955 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crivit ZA-3160 IAN 285955 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 4,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info