Manual Crivit CT 5833 IAN 310717 (page 11 of 46) (English, German, Dutch, French, Polish)

735882

Zoom out

Zoom in

1/46

13GB/IE

• Warning! The item must not

be used by people who

have a pacemaker!

Risk of electric shock!

• Only plug in the item if the mains

voltage of the socket corresponds

with the speciﬁcation on the name

plate.

• Connect the item to an easily

accessible socket only, so that you

can quickly disconnect it in the

event of a fault.

• Do not operate the equipment if it

is visibly damaged or if the power

cable or mains plug is faulty.

• If the item’s power cable is dam-

aged it must be replaced by the

manufacturer or its customer ser-

vice agent or a similarly qualiﬁed

person.

• Do not submerge the equipment,

the computer, power cable or

mains plug in water or other ﬂuids.

• Do not open the housing. Leave

repairs to the professionals.

Contact a specialist repair work-

shop for this. Liability and warran-

ty claims are excluded for repairs

that are independently carried out,

and for improper connection or

incorrect operation.

• Only parts corresponding to the

original device data may be used

for repairs. There are electrical

and mechanical parts in this item

that are necessary for protecting

against sources of danger.

• Never touch the mains plug with

wet or damp hands.

• Never pull the mains plug out of

the socket using the power cable,

always take hold of the mains

plug.

• Never use the power cable as a

carrying handle.

• Keep the item, the computer, the

mains plug and the power cable

away from open ﬁres and hot

surfaces.

• Lay the power cable in such a

way that it isn’t a trip hazard.

• Do not bend the power cable or

lay it over sharp edges.

• Use the item indoors only.

• Always turn oﬀ the item and

disconnect the mains plug from the

socket when you are not using it,

or when cleaning it, or if a mal-

function occurs.

• Do not allow the power cable to

come into contact with hot parts.

• Never pour liquid into the item or

the computer.

• Do not use steam cleaners to

clean the item. This could damage

the item.

Special precaution – risk

of injury for children!

• Keep children away from the

packaging materials. There is a

risk of suﬀocation!

• The item is not suitable play

equipment and must be stored

somewhere that is inaccessible

to children when not in use. To

eliminate the risk of injury, children

must not be within reach of the

item during the workout.

• In particular, point out to children

that the item is not a toy.

• Children should not be allowed

play with the item.

Dangers due to wear and

tear

• Only use the item if it is in perfect

condition. Check the item for dam-

age and wear before each use.

The safety of the item can only be

guaranteed if it is regularly in-

spected for damage and wear.

If, for instance, the vee belt or the

handles, show signs of damage,

do not use the item any longer.

• Use only original replacement

parts.

• Protect the item from extreme

temperatures, sun and dampness.

Improper storage and use of the

item could lead to premature wear

and tear, and possible breakages

in the structure, which could result

in injuries.

• Check the item regularly for dam-

age or deterioration.

If the item is damaged, you may

not use it any longer.

• Do NOT secure or screw the

device permanently to the ﬂoor.

Doing so can cause considerable

damage to the device.

• Tighten the nuts and bolts regularly.

• Ensure that defective parts, e.g.

connecting parts, are replaced

immediately and by a specialist

repairer only. Only use the equip-

ment again once all defective

parts have been replaced.

• Check the item regularly for visible

signs of wear and damage. Check

the screw connections regularly.

Pay special attention to the screw

connection on the height setting of

the foothold, as well as the screw

connections on the handles, which

can be found under the handrail

covers.

Assembly

The item should be assembled by two

people.

Take care with ﬂoors that are

susceptible to damage! Use a mat or the

like, if necessary, to protect the ﬂoor.

Step 1 (Fig. D)

1. Stand the base frame (1) on a solid, level

ﬂoor.

Note: To make it easier to assemble the legs,

turn the base frame so that the bolt holes are

facing upwards.

2. Screw the rear foot (9) tightly to the back

of the base frame with two screws (22) and

two washers (23).

3. Screw the front foot (8) tightly to the front of

the base frame using two screws (22) and

two washers (23).

Note: Ensure that the transport rollers on the

front foot (8) are pointing forwards.

Step 2 (Fig. E)

Note: Take note of the “R” (right) and “L” (left)

markings. The open side of the pedals must be

pointing outwards.

1. Attach the left pedal (6L) to the left pedal

bar (1b) and fasten the pedal with two

screws (19), two lock washers (20), two

washers (21) and two adjustment buttons

(18).

2. Attach the right pedal (6R) to the right

pedal bar (1a) and fasten the pedal with

two screws (19), two lock washers (20), two

washers (21) and two adjustment buttons

(18).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Crivit CT 5833 IAN 310717 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 4,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Crivit CT 5833 IAN 310717 Manual

Product: