736857
10
Zoom out
Zoom in
Previous page
1/37
Next page
10 GB/IE/NI
Disposal / Warranty / Service centreStart-up / Cleaning / Disposal
Remote control functions
ON / OFF GU10 LED lamp and colour LEDs
are on / off
Lamp GU10 lamp on / off
LED Colour cycle on / off
R red LEDs on / off
G green LEDs on / off
B blue LEDs on / off
Troubleshooting:
If the remote control
17
does not respond after
switching the light on, first press the wall switch to
switch the light off. Then wait approx. 15–20 sec-
onds and activate the wall switch again.
If after switching on the luminaire again via the
remote control unit
17
the luminaire still does not
respond, check the batteries in the remote control
unit
17
.
Changing the bulb
CAUTION! RISK OF ELECTRIC SHOCK!
To replace the bulb, first disconnect the light
from the mains circuit. To do so, remove the
fuse or switch off the circuit breaker in the fuse
box (0 position).
CAUTION HOT SURFACES! Allow the light
to cool completely.
Replace the bulb
10
only after it has fully cooled.
Remove the glass plate
8
by removing the
locating screws
10
.
CAUTION: Removing the locating screws will
also remove the washers
7
,
9
. Be careful
not to lose the washers.
Remove the glass plate
8
from the spacers
6
.
Unscrew the defective lamp
11
from the socket
12
with a ¼ turn to the left.
Use a clean, lint-free cloth when replacing the
lamp.
Only use LED lamps
11
with a GU10 base and
a maximum output of 3 W.
Carefully insert the new lamp into the socket
12
and secure with a ¼ turn to the right.
Place a rubber washer
7
on each locating
screw.
Push the locating screws through the glass
plate
8
.
Now place another rubber washer
9
on
each screw.
Secure the glass plate
8
to the light using the
locating screws.
Verify it is seated correctly.
Reinstall the fuse or switch on the circuit breaker.
Cleaning
CAUTION! RISK OF ELECTRIC SHOCK!
Disconnect the light from the mains circuit
before cleaning. To do so, remove the fuse or
switch off the circuit breaker in the fuse box
(0 position).
Only clean with a dry, lint-free cloth. Do not
use solvents, spirit or similar substances. They
could damage the light.
Allow the light to cool off completely.
The care of lights is limited to the surfaces.
Never allow moisture to enter terminal
compartments or conductive components.
Disposal
The package and packaging materials
consist entirely of environmentally friendly
materials. They can be disposed of at
your local recycling facility.
The symbol of the wheelie bin with the
line through it means that, in the European
Union, the product has to be disposed
of in a separate refuse collection. This applies to the
product and to all components bearing this symbol.
Do not dispose of products bearing this symbol in
your normal household waste, but instead they must
be taken for recycling to a collection site for electri-
cal and electronic appliances.
Recycling helps to reduce the consumption of raw
materials and protects the environment.
Batteries must not be disposed of as household
refuse! Advice is available from your local council.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crivit 14103504L IAN 276356 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crivit 14103504L IAN 276356 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Crivit 14103504L IAN 276356

Crivit 14103504L IAN 276356 User Manual - French, Portuguese, Spanish - 61 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info