736857
8
Zoom out
Zoom in
Previous page
1/37
Next page
8 GB/IE/NI
Installation / Start-upSafety / Preparation
To prevent burns, ensure that the light is switched
off and has cooled down before touching it.
Lamps develop a lot of heat in the area of the
lamp head.
Attention! Do not touch bulb components or
bulbs during operation as they can reach tem-
peratures > 90 °C.
Allow the light to cool down completely before
replacing a defective bulb.
Replace defective bulbs with new ones immedi-
ately. Use only those bulbs as stated in the
chapter on “Technical Data”. Before changing
bulbs, always first remove the fuse or switch off
the circuit breaker.
The LED light bulbs are permanently fitted and
are not replaceable.
Do not look directly into the light source (light
bulb, LED etc.).
The colour LEDs are only suitable as decorative
lighting, as the chromaticity coordinates of the
LEDs are within a range covered by Regulation
(EU) 2015 / 1428, Article 3, Paragraph 2.
The colour LEDs are not intended for any other
applications.
The fixed illuminant (G4 lamp excluded) is not
replaceable; when the illuminant reaches the end
of its useful life, the entire light must be replaced.
The permanently fitted LED light bulbs are not
suitable for dimmer or electronic switches.
Do not look at the LED with an optical instrument
(e.g. magnifier).
Safe working
Only use LED lamps with GU10 base and
maximum output of 3 Watt.
Do not touch the halogen lamps with bare hands.
If this accidentally occurs, the light bulb must
be wiped with alcohol and a lint-free cloth.
Mount the light so that it is protected from
moisture and dirt.
Carefully prepare for assembly and allow your-
self adequate time. Organise all parts and any
necessary additional tools or materials before
starting so they are easy to reach.
Always be attentive! Always pay attention to
what you are doing and proceed with caution
at all times. Never install the light if you are hav-
ing difficulty concentrating or do not feel well.
Preparation
Required tools and material
The tools and materials specified are not included.
This information and these values are non-binding
and are only provided as a reference. The nature
of the material is determined by the individual local
conditions.
- Pencil / making tool
- Voltage tester
- Screwdriver
- Electric drill
- Bit (ø 8 mm)
- Side cutting pliers
- Ladder
Prior to installation
Important: The electrical connection must be
established by a trained electrician or a person
trained to perform electrical connections. This per-
son must be familiar with the properties of the light
and the connection regulations.
Familiarise yourself with all the instructions and
diagrams in this manual, as well as with the
light itself, before you install it.
Before installation ensure that the circuit, to
which the light will be connected, is not ener-
gised. To do so, remove the fuse or switch off
the circuit breaker in the fuse box (0 position).
Use the voltage tester to verify the de-ener-
gised status.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crivit 14103504L IAN 276356 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crivit 14103504L IAN 276356 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Crivit 14103504L IAN 276356

Crivit 14103504L IAN 276356 User Manual - French, Portuguese, Spanish - 61 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info