736857
9
Zoom out
Zoom in
Previous page
1/37
Next page
9 GB/IE/NI
Installation / Start-upSafety / Preparation
Installation
Mounting the light
Prior to installation, remove the fuse or switch
off the circuit breaker (0 setting) in the fuse box.
Remove the screws
4
visible at the side of the
connection housing
2
and remove the mount-
ing bracket
1
at the back.
Use the slotted holes intended for the mounting
bracket
1
to mark the bores.
Now drill the fixing holes (ø 8 mm, depth ap-
prox. 40 mm). Ensure that you do not damage
the supply line.
Insert the rawlplugs
3
into the holes. Fasten
the mounting bracket
1
with the provided
screws
5
.
Open the plastic housing
13
. Then feed the
mains connection cable (external)
15
through
the protective tube
14
on the plastic housing
13
.
Now connect the connection cable of the light
to the mains connection cable (external)
15
us-
ing the terminal block
16
. Be sure to correctly
connect the individual wires of the mains con-
nection cable (external)
15
: live wire, black or
brown = symbol L, neutral wire, blue = symbol N)
.
Close the plastic housing
13
.
Use the screws
4
to fasten the luminaire to
the mounting bracket
1
.
Carefully insert the GU10 lamp
11
into the
socket and secure with a ¼ turn to the right.
Place a rubber washer
7
on each locating
screw
10
.
Insert the locating screws
10
through the glass
plate
8
.
Now place another rubber washer
9
on each
screw.
Secure the glass plate
8
to the light using the
locating screws.
Check for correct fitting.
Reinsert the fuse or switch the circuit breaker
back on.
Your light is now ready to use.
Start-up
Inserting / replacing
batteries (remote control)
Open the battery compartment at the back of
the remote control
17
.
Remove the spent battery, if necessary.
Insert new batteries into the battery compart-
ment. Only use type AAA batteries. Please note
the correct polarity.
This is indicated in the battery compartment of
the remote control
17
.
Close the battery compartment of the remote
control
17
.
Switching the luminaire on / off
You have the possibility of operating the luminaire
from an ordinary wall switch or switching it on and
off using the supplied remote control unit.
Switching the luminaire on / off using the
remote control unit:
The wall switch is in the basic position (OFF).
Activate the wall switch (ON).
Press the ON button on the remote control
17
to
switch the light on (GU10 LED lamp and colour
LEDs).
Push the OFF button on the remote control
17
to
switch the light completely off.
Switching the light on / off with the wall
switch
The wall switch is in the basic position (OFF).
Activate the wall switch (ON).
The GU10 lamps and the colour LED are on.
Activate the wall switch within approx. 1 second
by repeatedly pushing off and on. This will
switch through the various switch positions
(GU10 LED lamp and colour LEDs).
The light can be switched off with the wall switch
or the remote control
17
.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crivit 14103504L IAN 276356 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crivit 14103504L IAN 276356 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Crivit 14103504L IAN 276356

Crivit 14103504L IAN 276356 User Manual - French, Portuguese, Spanish - 61 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info