618062
12
Zoom out
Zoom in
Previous page
1/42
Next page
169
2.3.2 - Dive planning ( ).
While on the surface it is possible to go to the Plan function
( ) in order to visualize the remaining time available at dif-
ferent depths, without having to make decompression stops
(curve time), only by primary mixture MIX1.
The values are given both for the first of a (possible) series of
dives and during the surface interval between two or more
subsequent dives; in such case, Archimedes II takes into
account the residual nitrogen, therefore reducing the curve
times.
When the computer is set on program, by depressing
button B (Mode) twice, you view to the function ( ), as
shown by the alphanumeric display. The display will show (pic-
ture 5, air; picture 5.1., Nitrox) no decompression depths times
between 30 – 157 ft., in depth increments of 10 ft. This is obtai-
ned by depressing C ( ), or by manual depth decreases, each
of ft. 10, by depressing button A ( ).
Depress button B (Mode) for several seconds in order to get
back to the normal display (picture 1).
NOTE: PLAN function will be switched off in program
and in this case the computer shows Error.
Related topics:
2.3.1. - program parameters setting
3.4. - Curve dive
4.1.1. - Surface interval.
3.5.1. - Omitted decompression stage alarm. (Error)
2.3.3. - Rapid visualisation of set data ( ).
The INFO ( ) icon on Archimedes II Cressi-sub computer
UFDS display allows you to visualize, while on the surface,
every set parameter for your dive in a quick and easy manner
(picture 6), when the computer is set on program.
By depressing button A ( ), the computer will display the set
PO2 and the relating maximum depth MAX (given in m or ft.);
the possible setting of a safety factor (SF0/1/2); the possible
oxygen percentage of the primary Nitrox (Mix 1) and the rela-
ting icon ( ), or the icon ( ) in case of an air dive. By
keeping the button depressed, the computer will display the
second mixture’s parameters (if set) in alternative sequel, and
then return to those of the primary.
Related topics:
2.3.1. - program parameters setting
3.1. - AIR DIVE.
3.2. - NITROX MIXTURES DIVE.
2.4. - program parameters setting (deptho-
meter/timer)
The Archimedes II computer is equipped with a third program
( program or depth meter/timer) that may be used for
both apnea (free divers) divers and for the use in technical
dives with helium-based binary and ternary mixtures. In this
case, the instrument gives only the dive’s basic depth and dive
time parameters. It does not make tissue saturation and de-
saturation computation, which must be programmed and
computed by means of proper software and/or tables.
Cressi-sub reminds you that sport dives must be carried out
within the no-decompression guidelines, and at the maximum
depth of 132 ft. This is the limit of sport diving. To exceed these
limits remarkably increases the risk of decompression sickness.
ENGLISH
Manuale ARCHIMEDE II 2008:Manuale 6 26-06-2008 8:26 Pagina 169
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cressi Archimede II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cressi Archimede II in the language / languages: English as an attachment in your email.

The manual is 4,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info