618062
11
Zoom out
Zoom in
Previous page
1/42
Next page
168
• FO2 Mix 1 is the oxygen percentage of the primary Nitrox
mixture (MIX1) set on Archimedes II. The diver may vary it on
values between FO2=Air (21%) – basic setting - and FO2=50
% (included), by variations of 1% O2, obtained at each
depression of button C ( );
WARNING: Archimedes II is factory set with the primary
Nitrox mixture on Air (FO2=21%) and the second additional
mixture on Off (FO2= - -%)
NOTE: During the phase of parameters’ setting, by depres-
sing button C ( ), the computer will automatically stop on
standard Nitrox 1 mixture (EAN 32), with an oxygen percen-
tage of 32%. By keeping button C ( ) depressed, it will stop
on (Air) setting. This is to allow the FO2 operations setting to
be set quicker. Additionally, it is possible to set other FO2
values for the mixture (in increments of 1%) each time you
depress button C ( ). The constant depressing of button C
will increase the increments rapidly.
NOTE: By varying of the mixture’s oxygen percentage, the
computer indicates the maximum depth (MAX) which may
be reached with that mixture, since it depends on the PO2
value set.
• PO2 Mix 2 is the partial pressure of the latter of the two
Nitrox mixtures (MIX2) that can be set on Archimedes II
computer. It is factory set on the value of PO2=1.4, but it may
be changed by the diver on values between 1.0 bar (included)
and 1.6 bar (included), by increments of 0.1 bar, following
each other at each depression of button C ( );
• FO2 Mix 2 is the oxygen percentage of the second Nitrox
mixture (MIX2) set on Archimedes II computer. It is factory
set on Off (FO2= - -%) and it may be switched on only by the
diver, by depressing button C ( ), on values between FO2=Air
(21%) and FO2=99% (pure oxygen), by variations of 1%, fol-
lowing each other at each pressure of button C ( )
• A Safety Factor may be set by the diver at one of three
values (SF0/SF1/SF2). It is factory set at SFO.
WARNING: In order to dive more conservatively, please
change your safety factor any time you feel that you are at
risk of decompression sickness.
• The maximum depth alarm is set on ft. 132 and OFF by the
factory (picture 4 a); it can be switched On and be modified
as well as the depth at which it will start (picture 4b), by
depressing button C ( ).
At the end of the setting, depress button B (Mode) for seve-
ral seconds; this will allow you to return to the normal display
(picture 1).
Related topics:
2.5.1. - Maximum depth alarm.
3.1. - AIR DIVE.
3.2. - NITROX MIXTURES DIVE.
Manuale ARCHIMEDE II 2008:Manuale 6 26-06-2008 8:26 Pagina 168
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cressi Archimede II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cressi Archimede II in the language / languages: English as an attachment in your email.

The manual is 4,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info