818973
16
Zoom out
Zoom in
Previous page
1/422
Next page
Error Code Description Solution
TR26 CAN timeout error - right drive Communication failure with the right drive controller. Restart
the power supply.
TR27 CAN timeout error - left blade Communication failure with the left blade controller. Restart
the power supply.
TR28 CAN timeout error - central blade Communication failure with the central blade controller. Re-
start the power supply.
TR29 CAN timeout error - right blade Communication failure with the right blade controller. Restart
the power supply.
TR30 Battery compartment flip cover error Check that the connector under the seat is connected prop-
erly, and then restart the power supply.
TR31 Operator presence switch verifica-
tion error
Check that the connector under the seat is connected prop-
erly, and then restart the power supply.
TR32 Software authentication error Restart the power supply.
TL1 Motor positioning error Restart the power supply.
TL2 Drive motor stalled Check if the drive wheels are stuck and restart the power
supply.
TL3 Motor lowspeed protection Restart the power supply.
TL4 Motor overspeed protection Restart the power supply.
TL5 Motor Hall-sensor error Check that the Hall-effect connector of drive controller is
properly connected, and then restart the power supply.
TL6 Controller phase loss Check that motor cables of the drive controller are connec-
ted properly, and then restart the power supply.
TL7 MOSFET open circuit error If you encounter this issue, contact your distributor for a
solution.
TL8 Controller undervoltage The voltage is too low. Charge the battery pack before use.
TL9 Controller overvoltage The voltage is too high. Restart the power supply.
TL10 Battery low temperature The temperature of the battery compartment and battery is
too low. Use the machine at a suitable temperature and
restart the power supply.
TL11 PMU overtemperature High battery
temperature
The temperature of the battery compartment and battery is
too high. Wait for the battery to cool down, and then restart
the power supply.
TL12 Motor overtemperature The motor temperature is too high. Wait for the motor to cool
down, and then restart the power supply.
TL13 Controller overtemperature The controller temperature is too high. Wait for the controller
to cool down, and then restart the power supply.
TL14 Software overcurrent The load is too high. Restart the power supply.
TL15 Hardware overcurrent The load is too high. Restart the power supply.
TL16 Speed controller error Check that the speed controller of handle is connected prop-
erly, and then restart the power supply.
TL17 Controller pre-charge error Restart the power supply.
TL18 Brake error Restart the power supply.
TL19 Operating sequence error Place the left and right handles in the park position, and the
blade start switch in the OFF position. Sit in the seat and try
again.
16
English
EN
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cramer 82ZT107 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cramer 82ZT107 in the language / languages: All languages as an attachment in your email.

The manual is 7.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info