768916

Cosatto Giggle 2 Manual

4
Zoom out
Zoom in
Previous page
1/31
Next page
list of parts
Your pushchair is supplied in one carton. Some parts are packed in the carrycot.
1. Pushchair chassis 6. Carrycot with hood 11. Footmuff
2. Rear wheels x2 7. Carrycot apron 12. Seat unit
3. Front wheel assembly 8. Carrycot carry handle 13. Changing bag
4. Carrycot mattress 9. Seat unit hood 14. Raincover
5. Carrycot liner 10. Bumper bar with cover 15. Car seat mounting adaptors
1 - opening the chassis
Press the buttons (a) on either side of the chassis and push the handle down (b). Release the
locking lever (c) and lift the handle upwards until the chassis locks in the open position (d).
WARNING: Ensure that all locking devices are engaged before use.
The height of the handle can be adjusted by pressing the buttons (e) on either side of the chassis
and lifting the handle up (f) or down (g) to the preferred position.
2 - fitting the front wheel assembly
To fit the front wheel assembly insert the pin at the top of the wheel assembly into the wheel
housing (a) until it locks in place.
To remove the wheel assembly, pull back the lever located at the back of the wheel housing (b) and
remove the wheel assembly from the housing.
3 - fitting the rear wheels
To fit a rear wheel insert the pin into the wheel housing (a) until it locks in place. Repeat this with the
other rear wheel.
To remove the rear wheels, press the buttons on top of the wheel housings (b) and pull the wheels
clear (c).
4 - using the parking brake
To apply the brake, press the lever down firmly with your toe (a). Test the brake is engaged
correctly by trying to push the pushchair forwards for a short distance. To release the brake, lift the
lever (b).
NOTE: Always apply brake before loading or unloading a child from the pushchair.
5 - using the swivel wheel lock
Press down on the lever (a). Swivel the wheel until it locks in the forward facing position (b).
Lift the lever (c) to release the lock.
6 - removing the basket
Undo the press studs at the back on the inside of the basket (a) and on the outside at the bottom of
the basket (b). Release the clips (c) at the front of the basket.
Re-fitting is a reversal of this procedure.
7 - folding the chassis
While pressing the release button (a), pull the two levers (b) back. Press down on the handle (c)
closing the chassis until the autocatch retains the chassis in the folded position (d).
The handle position is adjustable and can be folded inwards (e) to achieve the most compact fold.
Whilst pressing on both buttons on both sides of handle, adjust the handle position move the
handle up or down and let go at desired hand position.
Note: The chassis cannot be folded with the carrycot installed and can only be folded with the seat
unit installed forward facing in the most upright recline position.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cosatto Giggle 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cosatto Giggle 2 in the language / languages: English, Spanish as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info