775405

Cortina E-OCTA PLUS - Bafang M400 Manual

91
Zoom out
Zoom in
Previous page
1/102
Next page
CUSTOMER MANUAL M400 DRIVE SYSTEM
90
Cancel password access:
Enter into “Start PassWord” interface to select “OFF”
and then briefly press (<0.5S) . This moment, it
prompt input password in the interface. If inputing
wrong password for ten times, the display will turn off
automatically. After inputing right password, it prompt
it is successful to close password in the interface. Two
seconds later, it exit back automatically to the original
interface. Briefly press for two times (interval time
is less than 0.5S) to exit back to the main interface or
select “BACK” → “EXIT” to exit the main interface.
⑽ “Set Clock”--- time setting
Briefly press (<0.5S) or to select “Set Clock” and
then briefly press (<0.5S) . The time is represented
in the 24-hour system. Cursor stays at the first digit of
the clock. Briefly press or to select “0-2” and
then briefly press (<0.5S) to confirm the selection.
This moment, the cursor switch to the second digit of
the clock. Briefly press or to select “0-9”, and
then briefly press (<0.5S) to confirm the selection.
And the cursor will switch to the first digit of the
minute. Briefly press or to select “0-5”, and
then briefly press (<0.5S) to confirm the selection.
The cursor will switch the second digit of the minute,
and then briefly press (<0.5S) or to select “0-9”.
Briefly press (<0.5S) to save the selection and exit
back to “Set Clock”. Briefly press for two tiems
(interval time is less than 0.5S) to exit back to the main
interface or select “BACK” → “EXIT” to exit back to
the main interface.
6.3.3 Enter into “Information” interface
Enter into “SETTING” interface and briefly press
(<0.5S) or to select “Information” and
briefly press (<0.5S) to confirm and enter
into the interface. It can check all content in the
interface“Information”, but can’t use the display to
modify the content.
⑴ “Wheel”and“Speed Limit”check
Enter into “Information”interface and it display the
data of “Wheel” and “Speed Limit”. User can use
BAFANG’s BESST tool to connect the display and PC
to modify the data. Briefly press (interval time is less
than 0.5S) for two times to exit back to the main
interface or select “BACK” → “EXIT” to exit back to
the main interface.
⑵ “Battery Info.”check
Briefly press (<0.5S) or to select “Battery Info.”
and briefly press (<0.5S) to enter into information
display interface. This moment, select “Nest Page”
and briefly press (<0.5S) to switch the display
interface. If detecting no data, it display “--”. See the
content and corresponding explanation shown in the
table below:
… 91 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cortina E-OCTA PLUS - Bafang M400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cortina E-OCTA PLUS - Bafang M400 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 4.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info