775405
89
Zoom out
Zoom in
Previous page
1/102
Next page
CUSTOMER MANUAL M400 DRIVE SYSTEM
88
back to “Power View”. Briefly press for two times
(interval time is less than 0.5S) to exit back to the main
interface, or select “BACK” “EXIT” to exit back the
main interface.
“SOC View” --- set indication mode for battery
capacity
Briefly press (<0.5S) or to selcet “SOC View”,
and then briefly press (<0.5S) . This moment, briefly
press (<0.5S) or to switch display mode for
output as “Percent”/“Voltage”. After confirmation,
briefly press (<0.5S) to save the set and exit
back to “SOC View”. Briefly press for two times
(interval time is less than 0.5S) to exit back to the main
interface, or select “BACK” “EXIT” to exit back to
the main menu.
“TRIP Reset” --- set reset function for single-trip
distance
Briefly press (<0.5S) or to select “TRIP
Reset”,and then briefly press (<0.5S) . This
moment, briefly press (<0.5S) or to switch
between “NO”and“YES”. TRIP Reset includes
maximum speed (MAXS), average speed (AVG), single-
trip distance (TRIP). After confirmation, briefly press
(<0.5S) again to save the set and exit back to the
“TRIP Reset”. Briefly press for two times (interval
time is less than 0.5S) to exit the main interface, or
select “BACK” “EXIT” to exit back to the main
interface. The data is not reset automatically when turn
off the display or turn off the power of the bicycle.
“AL Sensitivity” --- set light sensitivity
Briefly press (<0.5S) or to select “AL Sensitivity”,
and then briefly press (<0.5S) . This moment, briefly
press (<0.5S) or to switch level of the light
sensitivity between “0”/“1”/“2”/“3”/“4”/“5”/“OFF”.
“OFF” means close the function. Level 1 is the
weakest light sensitivity and level 5 is the strongest
light sensitivity. Select the level desired and briefly
press (<0.5S) again to save the setting and exit
back to “AL Sensitivity”. Briefly press for two times
(interval time is less than 0.5S) to exit back to main
interface or select “BACK” “EXIT” to exit back to
main interface.
“Password”--- access password setting
Briefly press (<0.5S) or to select “Password” and
then briefly press (<0.5S) . This momen, briefly press
(<0.5S) or to select “Start PassWord” and then
briefly press (<0.5S) again. Briefly press (<0.5S)
or to switch between “OFF”/“ON”, the below is the
specific way of switching.
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cortina E-OCTA PLUS - Bafang M400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cortina E-OCTA PLUS - Bafang M400 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 4.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info