780011
9
Zoom out
Zoom in
Previous page
1/208
Next page
English – 1
Safety instructions
Read all the safety information and in-
structions. Failure to observe the safety in-
formation and follow instructions may result
in electric shock, fire and/or serious injury.
Save all safety warnings and instructions for future ref-
erence.
uThe contact surfaces of the display holder may be-
come very hot (>60°C). Allow the contact surfaces to
adjust to the ambient temperature before you touch
them. This is particularly important when using a Smart-
phoneGrip.
uKeep swallowable small parts away from small chil-
dren. There is a risk of serious injury.
uNever short-circuit the pins. The display holder may be
irreparably damaged and must then be replaced.
uEnsure that the contacts are free of dirt. By doing this,
you prevent malfunctions or damage.
uAfter a fall, check the display holder for sharp edges.
Replace it if required.
uDo not stand your bicycle upside down on its saddle
and handlebars if the on-board computer or its holder
protrude from the handlebars. This may irreparably
damage the on-board computer or the holder. Also re-
move the on-board computer before placing the bicycle
on a wall mount to ensure that the on-board computer
does not fall off or become damaged.
uObserve all national regulations which set out the ap-
proved use of eBikes.
uRead and observe the safety warnings and directions
contained in all the eBike system operating instruc-
tions and in the operating instructions of your eBike.
Product description and
specifications
Intended use
The display holder is intended to establish the mechanical
and electrical connection to a display or on-board computer.
Only original Bosch eBike components can be connected to
the display holder.
A display holder is not required for an eBike system to func-
tion.
Product features
The numbering of the components shown refers to the illus-
trations on the graphics pages at the beginning of the
manual.
(1) Display mount
(2) Adapter tray
(3) Clamp for holder
(4) Clamp screw
(5) Round rubber spacer
(6) 1-arm socket
(7) Screw for adjusting tilt
(8) Removal blocker
(9) Snap-in hook
(10) Connection cables
(11) Fastening screws for display mount
The display mount(1) can also be embedded in the bicycle
design.
Technical data
Display holder
Product code BDS3210
BDS3250
BDS3620
BDS3630
Output voltage V 4.75 to 5.4
Output current, max. A 1.5
Operating temperature °C –5 to +40
Storage temperature °C +10 to +40
Protection rating IP54
Fitting
Installation positions (seefigureA)
The 1-arm socket can be mounted at three different posi-
tions on the handlebars:
In front of the handlebars
Over the stem
In the triangle between the stem and handlebar
Note: In order to ensure clean cable routing, the appropriate
display mount must be used for each of the three different
positions: The BDS3210 display mount for in front of the
handlebars (electrical connections at the rear); the
BDS3250 display mount for over the stem or in the triangle
between the stem and handlebar (electrical connections at
the front).
If you want to change the installation position and you have
the correct display mount(1), you must first remove the 1-
arm socket(6) and re-mount it afterwards.
Note: Please be aware that there are two different handlebar
diameters (31.8mm and 35mm). Your bicycle retailer will
help you to select the correct components.
Mounting the display mount (seefigureB)
Insert the display mount(1) into the adapter tray(2). En-
sure that it is in the required installation position. Secure the
display mount(1) from below using the screws(11). When
Bosch eBike Systems 0 275 007 3S1 | (09.06.2021)
9


Need help? Post your question in this forum.

Forumrules
1

Forum

corratec-bosch-e-bike-system-2022

Reset search

  • Please send a user manual (not dealers' technical manual) in ENGLISH !!! Submitted on 27-2-2023 at 11:26

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Corratec Bosch E-Bike System 2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Corratec Bosch E-Bike System 2022 in the language / languages: English, German as an attachment in your email.

The manual is 27.59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info