780011
10
Zoom out
Zoom in
Previous page
1/208
Next page
English – 2
doing so, be aware of the torque specified on the adapter
tray(2).
Connect the connection cables that come out of the drive
unit and the control unit. It does not matter which cable is
connected to which connection for the functions to work.
When connecting the cables, ensure that the markings on
the connector and on the cable match.
Securing on the handlebars (seefigureC)
Note: The display holder must only be secured in the cyl-
indrical area of the handlebars and not in the tapered area.
To clamp a display in the centre, the handlebars must have a
cylindrical area of at least 90mm in width.
Open the clamp and bring the 1-arm socket(6), together
with the round rubber spacer(5), into the required position.
Gently tighten the clamp screw(4) so that the 1-arm
socket(6) can still move.
Adjust the tilt for the display mount by loosening and tight-
ening the screw(7). Preferably adjust the tilt without the
display or on-board computer.
In the connection between the 1-arm socket(6) and the ad-
apter tray, there are interlocking teeth, which means that it
is only possible to align the adapter tray in predefined posi-
tions. Before tightening the screw(7), make sure that the
teeth engage in one another correctly. In addition, be aware
of the torque specified on the 1-arm socket(6).
Bring the 1-arm socket(6) into its final position and tighten
the clamp screw(4). Be aware of the torque specified on the
1-arm socket(6) here too.
Thanks to the round rubber spacer(5), it is possible to move
the 1-arm socket(6) in all directions.
Removal blocker
A device attached to the display holder can be secured using
the removal blocker(8). Usage is described in the operating
instructions for the respective device.
Maintenance and servicing
Maintenance and cleaning
The display holder must not be cleaned with pressurised wa-
ter.
Use a soft cloth dampened only with water for cleaning. Do
not use cleaning products of any kind.
uHave all repairs performed only by an authorised bike
dealer.
After-sales service and advice on using products
If you have any questions about the eBike system and its
components, contact an authorised bicycle dealer.
For contact details of authorised bike dealerships, please
visit www.bosch-ebike.com.
Disposal
The drive unit, on-board computer incl. operat-
ing unit, battery, speed sensor, accessories
and packaging should be disposed of in an en-
vironmentally correct manner.
Do not dispose of eBikes and their components with house-
hold waste.
In accordance with Directive 2012/19/EU
and Directive 2006/66/EC respectively, elec-
tronic devices that are no longer usable and de-
fective/drained batteries must be collected
separately and recycled in an environmentally
friendly manner.
Please return Bosch eBike components that are no longer
usable to an authorised bicycle dealer.
Subject to change without notice.
0 275 007 3S1 | (09.06.2021) Bosch eBike Systems
10


Need help? Post your question in this forum.

Forumrules
1

Forum

corratec-bosch-e-bike-system-2022

Reset search

  • Please send a user manual (not dealers' technical manual) in ENGLISH !!! Submitted on 27-2-2023 at 11:26

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Corratec Bosch E-Bike System 2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Corratec Bosch E-Bike System 2022 in the language / languages: English, German as an attachment in your email.

The manual is 27.59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info