Manual Corratec Bosch E-Bike System 2022 (page 206 of 208) (English, German)

780011

206

Zoom out

Zoom in

1/208

English – 2

0 275 007 XCX | (24.04.2018) Bosch eBike Systems

Technical data

Charger Standard Charger

(36–4/230) Compact Charger

(36–2/100-230) Fast Charger

(36–6/230)

Product code BCS220 BCS230 BCS250

Rated voltage V ~ 207...264 90...264 207...264

Frequency Hz 47...63 47...63 47...63

Battery charging voltage V = 36 36 36

Charging current (max.) A 4 2 6 A)

Charging time

– PowerPack 300, approx. hrs 2,5 5 2

– PowerPack 400, approx. hrs 3,5 6,5 2,5

– PowerPack 500, approx. hrs 4,5 7,5 3

Operating temperature °C 0 ...+40 0 ...+40 0 ...+40

Storage temperature °C –10 ...+50 –10 ...+50 –10 ...+50

Weight, approx. kg 0,8 0,6 1,0

Protection rating IP 40 IP 40 IP 40

A) The charging current is limited to 4A for the PowerPack

300 and for Classic + Line batteries.

The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.

Operation

Start-up

Connecting the charger to the mains (see figure A)

uPay attention to the mains voltage. The voltage of the

power source must match the voltage specified on the

rating plate of the charger. Chargers marked 230 V can

also be operated at 220 V.

Plug the device connector (3) of the power cable into the

device socket (2) on the charger.

Connect the power cable (country-specific) to the mains.

Charging the removed battery (see figure B)

Switch the battery off and remove it from its holder on the

eBike. When doing so, read and observe the operating in-

structions of the battery.

uEnsure the battery is placed on clean surfaces only.

Avoid getting dirt, e.g. sand or soil, in the charging socket

and contacts in particular.

Plug the charging connector (5) of the charger into the

socket (6) on the battery.

Charging the battery on the bike (see figures C andD)

Switch the battery off. Clean the cover of the charging

socket (7). Avoid getting dirt, e.g. sand or soil, in the char-

ging socket and contacts in particular. Lift the cover of the

charging socket (7) and plug the charging connector (5) into

the charging socket (6).

uCharge the battery only in accordance with all safety

instructions. If this is not possible, remove the battery

from the holder and charge it in a more suitable location.

When doing so, read and observe the operating instruc-

tions of the battery.

Charging process for two batteries

If two batteries are fitted to an eBike, both batteries can be

charged using the uncovered connection. To begin with,

both batteries are charged one after the other until they

reach approx.80–90% capacity, then they are both

charged at the same time until full (the LED flashes on both

batteries).

When the bike is in operation, power is drawn from both bat-

teries on an alternating basis.

If you take the batteries out of the holders, you can charge

each one individually.

Charging process

The charging process begins as soon as the charger is con-

nected to the battery or charging socket on the bike and to

the mains.

Note: The charging process is only possible when the tem-

perature of the eBike battery is within the permitted char-

ging temperature range.

Note: The drive unit is deactivated during the charging pro-

cess.

The battery can be charged with or without the on-board

computer. When charging without the on-board computer,

the charging progress can be observed via the battery

charge indicator.

When the on-board computer is connected, a charging noti-

fication appears on the display.

Please send a user manual (not dealers' technical manual) in ENGLISH !!! Submitted on 27-2-2023 at 11:26
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Corratec Bosch E-Bike System 2022 in the language / languages: English, German as an attachment in your email.

The manual is 27.59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Corratec Bosch E-Bike System 2022 Manual

Product: