Manual Constructa CA626252 (page 29 of 44) (English, German, Dutch, French)

755345

Zoom out

Zoom in

1/44

Cleaning and care

The information in this section provides help on how best to

care for your hob.

Suitable maintenance and cleaning products can be purchased

from the after-sales service or in our e-Shop.

Ceramic

Clean the hob after each use. This will prevent spills from

burning onto the ceramic.

Only clean the hob when it has cooled down sufficiently.

Use only cleaning agents which are suitable for glass ceramic.

Follow the cleaning instructions on the packaging.

Never use:

■Undiluted washing-up liquid

■Detergent intended for dishwashers

■Scouring agents

■Harsh cleaning agents such as oven spray or stain remover

■Abrasive sponges

■High-pressure cleaners or steam jet cleaners

Ground-in dirt can be best removed with a glass scraper,

available from retailers. Please note the manufacturer's

instructions.

You can also obtain a suitable glass scraper from our after-

sales service or from the e-Shop.

Using special sponges to clean glass ceramic achieves great

cleaning results.

Hob surround

To prevent damage to the hob surround, observe the following

instructions:

■Use only hot soapy water.

■Wash new sponge cloths thoroughly before use.

■Do not use any sharp or abrasive agents.

■Do not use the glass scraper.

Rectifying faults

Malfunctions often have simple explanations. Please read the

following notes before calling the aftersales service.

If - flashes in the hotplate indicators:

If - flashes in the hotplate indicators when the appliance is

connected to the mains or following a power cut, the

electronics are malfunctioning. To acknowledge the fault, briefly

cover the controls with your hand.

After-sales service

Our after-sales service is there for you if your appliance should

need to be repaired. We are committed fo find the best solution

also in order to avoid an unnecessary call-out.

E number and FD number:

Please quote the E number (product number) and the FD

number (production number) of your appliance when

contacting the after-sales service. The rating plate bearing

these numbers can be found on the appliance certificate.

Please note that a visit from an after-sales service engineer is

not free of charge, even during the warranty period.

Please find the contact data of all countries in the enclosed

customer service list.

Rely on the professionalism of the manufacturer. You can

therefore be sure that the repair is carried out by trained service

technicians who carry original spare parts for your appliances.

Display Fault Measure

Blank There is no power supply. Check the household fuse for the appliance. Check whether there is a

power cut by trying other electronic appliances.

All displays

flash The controls are damp or an object is

resting on them. Dry the controls or remove the object.

”ƒ The electronics have overheated and

have switched off the corresponding

hotplate.

Wait until the electronics have cooled down sufficiently. Then touch a con-

trol for the hotplate.

”… The electronics have overheated and

have switched off all hotplates. Wait until the electronics have cooled down sufficiently. Then touch any

control.

”‰ The hotplate was in operation for too

long and has switched itself off. You can switch the hotplate back on again immediately.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Constructa CA626252 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Constructa CA626252 Manual

Product: