755345
28
Zoom out
Zoom in
Previous page
1/44
Next page
28
Automatic time limit
If a hotplate has been switched on for a long time without the
setting being changed, the automatic time limit is activated.
The hotplate stops heating. and the /œ residual heat
indicator flash alternately on the hotplate display.
The display goes out when you touch any control. You can
make new settings.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
Basic settings
Your appliance has various basic settings. You can adapt these
settings to suit your own needs.
Changing the basic settings
The hob must be switched off.
1. Switch on the hob.
2. Within the next 10 seconds, press and hold the symbol
for 4 seconds
and flash alternately in the lower display and lights up in
the upper display.
3. Touch the symbol repeatedly until the desired indicator
appears in the lower display.
4. Touch the + or - symbol repeatedly until the desired setting
appears in the upper display.
5. Touch and hold the symbol for 4 seconds.
The setting is activated.
Switching off
To exit the basic setting, switch off the hob with the main switch
and make new settings.
Display Function
™‚ Automatic childproof lock
Switched off.*
Switched on.
™ƒ Audible signal
Confirmation signal and incorrect operation signal switched off (main switch signal always remains on).
Only incorrect operation signal switched on.
ƒ Only confirmation signal switched on.
Confirmation signal and incorrect operation signal switched on.*
™ˆ Activation of the filament circuits
Switched off.
Switched on.
ƒ Last setting before the hotplate switched off.*
™Š Time for selecting the hotplate
Unlimited: The last selected hotplate can always be adjusted without having to select it again.*
Once you select a hotplate, you have 10 seconds to adjust it, after which you will have to select it again in order to
be able to adjust it.
™‹ Reset the basic settings
Switched off.*
Switched on.
*Basic setting
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Constructa CA626252 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Constructa CA626252 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info