8645
16
Zoom out
Zoom in
Previous page
1/47
Next page
Table-2
Rx Entity Packet Class TTL Action Notes
ADSL IGMP query 1 Relay to Ethernet
IGMP report 1 Ignore
IGMP leave 1 Ignore
General Multicast IP - Relay it to Ethernet.
Ethernet IGMP query 1 Ignore
IGMP report 1 Relay to all ADSL PVC
IGMP leave 1 Relay to all ADSL PVC
General Multicast IP - Ignore
PPP:
The current release supports multiple PPP sessions per PVC. The PPP configuration in
the WAN configuration page is for the first PPP session for each PVC. The predefined
PPP Account Name (Account ID) is “Simple PPP Account 0” for PVC0 and predefined
PPP Connection Name is “Simple PPP Session 0” for PVC0. For the other PVC X, the
predefined account name and connection name will be Simple PPP Account X and
Simple PPP Session X. X is the PVC number from 1 to 7.
It can support up to total of 16 PPP sessions, and each PVC can support up to 8 PPP
sessions, the multiple PPP sessions may be configured with any combination over 8
PVCs.
Service Name:
The service name of PPP is required by some ISPs. If the ISP does not provide the
Service Name, please leave it blank.
Username:
Your user name provided by your ISP.
Password:
Your password provided bye your ISP.
Disconnect Timeout:
The Disconnect Timeout allows the user to set the specific period of time to
disconnect from the ISP. The default is 0, which means never disconnect from the ISP.
MRU:
Maximum Receive Unit indicates the peer of PPP connection the maximum size of the
PPP information field this device can be received. The default value is 1492 and is
used in the beginning of the PPP negotiation. In the normal negotiation, the peer will
accept this MRU and will not send packet with information field larger than this value.
MTU:
Maximum Transmission Unit indicates the network stack of any packet is larger
than this value will be fragmented before the transmission. During the PPP
negotiation, the peer of the PPP connection will indicates its MRU and will be
accepted. The actual MTU of the PPP connection will be set to the smaller one
of MTU and the peer’s MRU. The default is value 1492.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Conceptronic ADSLR4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Conceptronic ADSLR4 in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info