8645
18
Zoom out
Zoom in
Previous page
1/47
Next page
LAN
The LAN configuration page allows you to set the configuration for the LAN port.
LAN Configuration
LAN IP Address & Subnet Mask:
The default is 10.0.0.2 and 255.0.0.0 you can change it to another private IP address,
such as 211.22.10.191 and 255.255.255.0. For most configurations it is recommended
to leave it as default.
DHCP Server:
System Allocated. The DHCP address pool is based on LAN port IP address plus 12 IP
address. For example, the LAN IP address is 10.0.0.2; the DHCP address pool is at the
range of 10.0.0.3 to 10.0.0.14.
User Defined:
The DHCP address pool is at the range of User Defined Start Address and User Defined
End Address. The maximum pool size can be 253 IP address:255 total IP address-1
broadcast address-1 LAN port IP address.
DHCP Gateway Selection:
The default setting for the DHCP Gateway Selection is “Automatic”. The user can
select the “User Defined” to specify “User Defined Gateway Address”. The DHCP
server will issue the “ User Defined Gateway Address” to the LAN DHCP client.
Lease time:
The lease time is the amount of time of a network user will be allowed to connect
with DHCP server. If all fields are 0, the allocated IP address will be effective forever.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Conceptronic ADSLR4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Conceptronic ADSLR4 in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info