804417
29
Zoom out
Zoom in
Previous page
1/71
Next page
PRODUCT DESCRIPTION
ASteam trigger
BHandle
CPower cord
DPower On/Off button
EManual cleaner handle
FManual cleaner steam trigger
GCleaning solution foot pedal
HCleaning solution tank cap
ICleaning solution tank
JHook for attaching a power cord
KManual cleaner release button
LWater tank release button
MWater tank
NHead
OBrush
PHose adapter
QHose
RExtension adapter
STextile pad
TCarpet glider
USmall textile pad
VWindow squeegee / Head for upholstery
(with a small textile pad)
W1Wire brush
W2Nozzle (45°)
W3Small round brush
W4Large round brush
W5Scraper
W6Tile joint brush
EN
55CP 2000
OPERATING INSTRUCTIONS
Assembly
Remove all components from the packaging.
1. lnsert the handle into the cleaner main body until it locks into position
(1).
2. Assemble the main body of the cleaner to the Floor Head (2).
Use
BEFORE THE FIRST USE
1. Press the Water Tank Release Button and remove the tank (3).
NOTE: A tube feeding water from the water tank to the boiler is loaded with
a brass ball. This design is intentional and serves to increase the efficiency
of water use.
It is normal for this ball to create a rattling sound inside the Water Tank
during operation.
2. Pull the Water Tank by the cap (4).
3. Fill the tank with cold tap water. Secure the tank with the cap (4). Do
not add any chemicals, detergents or perfumes to the Water Tank.
NOTE: We recommend using distilled or de-mineralized water in order to
reduce building up mineral deposits and prolonging the life of the appliance.
4. Put the Water Tank back in its place and make sure the Water Filter is
installed.
5. Attach the Textile Pad on the bottom of the Head (5).
IMPORTANT: Always disconnect the appliance from the mains prior to
adding water or changing the Textile Pad.
NOTE: Wash the Textile Pad before putting on the appliance, it prevents
a presence of any loose fibres.
FLOOR CLEANING
NOTE: Always vacuum or sweep the floor prior to use the steam cleaner.
IMPORTANT: Do not use the cleaner without the Textile Pad attached to
the Head.
NOTE: Do not use the Carpet Glider for cleaning hard floor types.
EN
56 CP 2000
EN
56 CP2000
PRODUCT DESCRIPTION
ASteam trigger
BHandle
CPower cord
DPower On/Off button
EManual cleaner handle
FManual cleaner steam trigger
GCleaning solution foot pedal
HCleaning solution tank cap
ICleaning solution tank
JHook for attaching a power cord
KManual cleaner release button
LWater tank release button
MWater tank
NHead
OBrush
PHose adapter
QHose
RExtension adapter
STextile pad
TCarpet glider
USmall textile pad
VWindow squeegee / Head for upholstery
(with a small textile pad)
W1Wire brush
W2Nozzle (45°)
W3Small round brush
W4Large round brush
W5Scraper
W6Tile joint brush
EN
55CP 2000
OPERATING INSTRUCTIONS
Assembly
Remove all components from the packaging.
1. lnsert the handle into the cleaner main body until it locks into position
(1).
2. Assemble the main body of the cleaner to the Floor Head (2).
Use
BEFORE THE FIRST USE
1. Press the Water Tank Release Button and remove the tank (3).
NOTE: A tube feeding water from the water tank to the boiler is loaded with
a brass ball. This design is intentional and serves to increase the efficiency
of water use.
It is normal for this ball to create a rattling sound inside the Water Tank
during operation.
2. Pull the Water Tank by the cap (4).
3. Fill the tank with cold tap water. Secure the tank with the cap (4). Do
not add any chemicals, detergents or perfumes to the Water Tank.
NOTE: We recommend using distilled or de-mineralized water in order to
reduce building up mineral deposits and prolonging the life of the appliance.
4. Put the Water Tank back in its place and make sure the Water Filter is
installed.
5. Attach the Textile Pad on the bottom of the Head (5).
IMPORTANT: Always disconnect the appliance from the mains prior to
adding water or changing the Textile Pad.
NOTE: Wash the Textile Pad before putting on the appliance, it prevents
a presence of any loose fibres.
FLOOR CLEANING
NOTE: Always vacuum or sweep the floor prior to use the steam cleaner.
IMPORTANT: Do not use the cleaner without the Textile Pad attached to
the Head.
NOTE: Do not use the Carpet Glider for cleaning hard floor types.
EN
56 CP 2000
EN
57CP2000
(CP2000)
ENEN
5756 CP2000 | CP2010CP2000 | CP2010
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Concept CP2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Concept CP2000 in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 7.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info