Manual Computherm Q7 (page 13 of 32) (English)

555506

Zoom out

Zoom in

1/32

where plate radiators are installed) with low thermal inertia, while

the +0/-0.2°C switching sensitivity (the display shows symbol “S:2”

for this setting) is recommended to control heating systems with high

thermal inertia (e.g. underfloor heating).

3.4 Activation of the pump protection function

Underthefactorydefaultsettings,thepumpprotectionfunction

is inactive. It can be activated or switched off by pressing “DAY”,

“PROG” and the large or buttons one after the other, after

going back to the main screen by pressing the “SET” button. Setting

“HP:OFF” (switched-off) or “HP:ON” (activated) is acknowledged

by pressing the “SET” button. (After approximately 10 seconds

settings are automatically acknowledged and the device goes back

to the main screen). By pressing the “RESET” button, the pipe

protection function is reset to factory default setting (“HP:OFF”).

To prevent the pump from sticking, the activated pump

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Computherm Q7 in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Computherm Q7 Manual

Product: