668073
16
Zoom out
Zoom in
Previous page
1/20
Next page
16
PERIODIC MAINTENANCE
1. CLEANING THE SQUEEGEE TUBE
Periodically, or whenever suction seems to be unsatisfactory, check the squeegee tube is
not obstructed. To clean it, proceed as follows:
1. remove the tube from the sleeve on the squeegee
2. remove the other end from the recovery tank
3. wash the inside of the tube with a water jet introduced from the side where it is
connected to the tank
4. reassemble the tube
ATTENTION: Do not wash the tube running between the
suction unit and the suction cap.
2. CLEANING THE SOLUTION TANK AND FILTER
1. Remove the recovery tank.
2. Detach the quick connection to avoid breaking the connection itself.
3. Using a screwdriver, remove the two screws fixing the solution tank to the frame.
4. Remove the solution tank by pushing it forwards and unhooking it from the fixing
bracket.
5. Loosen the solution tank cap.
6. Remove the filter and clean it.
7. Rinse the tank and clean with a jet of water.
8. Reassemble the filter and cap.
9. Reassemble the tank, carrying out the above operations in the reverse order.
ATTENTION: this operation must be carried out using gloves to
protect against contact with dangerous solutions.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Comac VISPA 35E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Comac VISPA 35E in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info