668073
15
Zoom out
Zoom in
Previous page
1/20
Next page
15
DAILY MAINTENANCE
3. REPLACING THE SQUEEGEE RUBBERS
Check the state of wear and tear of the squeegee rubbers and, if necessary, replace
them. To replace them you must:
1. Raise the squeegee
2. Remove the two knobs
3. Disassemble the squeegee from its support
4. Remove the tube from the squeegee nozzle so the squeegee can be removed
5. Unscrew the knobs on the squeegee that block the rubber-pressing blades and
remove them
6. Remove the rubber-pressing blades
7. Replace the rubbers
8. Reassemble everything, carrying out the above-mentioned operations in the reverse
order
4. DISASSEMBLING THE BRUSH
1. Raise the squeegee.
2. Raise the machine by using the handlebars as a lever and position it with the
recovery tank on the ground.
3. With the base raised, remove the brush manually by rotating it clockwise.
ATTENTION: Disconnect the power cable from the mains
socket before carrying out any maintenance operations.
ATTENTION: During this operation, check there are no people
or objects near the brush.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Comac VISPA 35E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Comac VISPA 35E in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info