669024
7
Zoom out
Zoom in
Previous page
1/11
Next page
6
Mary
Roof
slope
(α)
(α) (α)
(α)
Distance A H
15° 1.00 m
30° 1.30 m
45° 2.00 m
60°
More than 1.85 m
2.60 m
2.5 Advice on flues and connections
Flues must be made from suitable materials and perfectly insulated, with characteristics that prevent
temperature decreases.
The inner walls must be perfectly smooth without any narrowing or protrusions along the entire length, so as not
to create friction or vortices in the smoke which could cause a considerable reduction in draught.
Any cleaning and inspection doors must be perfectly closed during operation.
The flue outlets must be 0.5 m higher than any obstacles located less than 10 m away and must end with
chimney caps or cowls having a useful outlet cross section of at least double that of the flue.
The following two figures give the data regarding the distances and positioning of chimney caps in conformity
with the provisions of UNI 10683/98.
Obstacle
Less than 5 m
Min 0.5m
Min 0.5m
approx. 0.5 m
Min 0.5m
The chimney outlet must be at least
0.5 m higher than any obstacle
within a radius of 10 m.
fig 2b Chimney cap positioning and distances
UNI 10683/98 tables
Before connecting stove to an existing chimney, in addition to complying with that described above, make sure
there are no openings or cracks
where air could enter and cause a
temperature decrease affecting the
draught.
Also make sure there are no
hindrances caused by foreign
bodies or a build-up of soot.
The first connection section leaving
the stove should be vertical,
whereas the flue connection to the
chimney (which goes to the chimney
cap) must only enter by a few cm,
so as not to reduce the cross
section of the flue.
If the flue is not perpendicular to the
chimney it is advisable to make the connection with special steel fittings
that allow a maximum slope of 45°.
Roof
slope
(α)
(α) (α)
(α)
Distance B H
15° 0.50 m
30° 0.50 m
45° 0.50 m
60°
Less than 1.85 m
0.50 m
NO
NO
YES
M AX 45 °
Fig. 3 Stove
-
chimney connection
fig 2a Chimney cap positioning and
distances
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cola Mary at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cola Mary in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info