538286

Cobra MR F75 Manual

36
Zoom out
Zoom in
Previous page
1/40
Next page
Nothing comes close to a Cobra
®
DSC Operation
67
Sending A Position Send
Position Send uses your connected GPS in similar fashion to the position request
function, except that you initiate the activity to let another station know where you are.
To Send A Position Send Message:
1.
In Standby mode, select a channel on which you want
to communicate.
2. Press the Call/Set button to enter the Call Send menu.
3. Use the Up/Down buttons to scroll to POS SEND
(position send).
4. Press the Call/Set button to enter the individual directory.
5. Use the Up/Down buttons to select the station
to which you want to send your position.
6. Press the Call/Set button to send your position.
After your position is sent, the LCD will show
POS SEND
(position send). You will have two (2) choices.
■
Resend your position to the same station.
■
Exit from Position Send mode.
a. To Resend Your Position:
1)
Use the Up/Down buttons to select SEND.
2) Press the Call/Set button to resend your position.
b. To Exit From The Position Send Mode:
1)
Use the Up/Down buttons to select EXIT.
2) Press the Call/Set button to return to the
Call Send menu.
Operating Your Radio
Individual Directory
Transmit Position
Send/Exit
Standby Mode
Position Send
66
English
DSC Operation
Receiving A Position Request
When you went through the DSC set-up process, you set a position request reply
type. (See page 54 to change your setting.) Depending on the setting you chose,
when a
Position Request message is received, your radio will enter either:
■
The Auto Reply mode.
■
The Manual Reply mode.
When The Radio Is In Auto Reply Mode:
A position request will sound the position request
alarm and show the name of the requesting station
on the LCD. Your radio will automatically respond.
It will send your position, if you have a GPS connected
to your radio, or
NO POS. DATA (no position data),
if you do not have a GPS device connected.
1. Press any button to silence the alarm and
exit the display.
When The Radio Is In The Manual Reply Mode:
A position request message will sound the position
request alarm and show the name of the requesting
station. You can choose to:
■
Reply and send your position.
■
Exit without sending your position.
a. If You Choose To Reply With Your Position:
1)
Use the Up/Down buttons to select REPLY.
2) Press the Call/Set button to send your position.
3) Press any button to return to Standby mode.
b. If You Choose Not To Reply:
1)
Use the Up/Down buttons to select EXIT.
2) Press the Call/Set button to return to
Standby mode without sending your position.
P
osition Request
P
osition Request
Operating Your Radio
Repl
y/Exit
… 36 …


Need help? Post your question in this forum.

Forumrules
1

Forum

cobra-mr-f75

Reset search

  • Anyone knows the pinout if the 7 pins connector of the microphone
    Submitted on 25-11-2021 at 12:31

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra MR F75 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MR F75 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info