538286

Cobra MR F75 Manual

34
Zoom out
Zoom in
Previous page
1/40
Next page
Nothing comes close to a Cobra
®
DSC Operation
63
Receiving A Group Call
When another station makes a Group call to your radio, the individual alarm
will sound, the caller will be identified on the LCD, and your radio will be
switched to the channel selected by the caller, just as for an individual call.
Press any button to turn
Off the alarm.
To Receive A Group Call:
1.
Listen for the group voice message.
2. Press the Talk button and respond
only if appropriate.
Sending A Position Request
Position Request mode enables a DSC radio to obtain the position
(latitude and longitude) of a station that has a GPS device connected
to the DSC radio at that station.
To Request The Position Of Another Station:
1.
In Standby mode, select a channel on which
you want to communicate.
2. Press the Call/Set button to enter the
Call Send menu.
3. Use the Up/Down buttons to scroll to
POSREQST (position request) on
the menu.
4. Press the Call/Set button to enter the
Individual Directory menu.
5. Use the Up/Down buttons to scroll to the
name of the station whose position you
want to request.
Caller Identified
Individual Directory
Position Request
Standby Mode
Operating Your Radio
62
English
DSC Operation
Receiving An Individual Call
When another station makes an Individual call to your radio,
the individual alarm will sound, the caller will be identified
on the LCD, and your radio will be switched to the channel
selected by the caller. Press any button to turn
Off the alarm.
To Receive An Individual Call:
1.
Press the Talk button and greet the caller —
almost as if you were answering the telephone.
Sending A Group Call
Sending a Group call is very similar to sending an individual call, except that
the group MMSI is used and the resend and DSC responses do not apply.
To Send A Group Call:
1.
In Standby mode, select a channel on which you want
to communicate.
2. Press the Call/Set button to enter the Call Send menu.
3. Use the Up/Down buttons to scroll to GROUP.
4. Press the Call/Set button to move to the send
or exit menu.
5. Use the Up/Down buttons to select SEND or EXIT.
6. Press the Call/Set button to send the message or
return to the Call Send menu if EXIT was chosen.
All radios will be switched to the channel selected in
step 1. Press and hold the
Talk button to send your
voice message to everyone in the group.
Anyone in the group can now also transmit on
that channel.
Caller Identified
Standby Mode
Group
Operating Your Radio
Group Waiting
Send/Exit
… 34 …


Need help? Post your question in this forum.

Forumrules
1

Forum

cobra-mr-f75

Reset search

  • Anyone knows the pinout if the 7 pins connector of the microphone
    Submitted on 25-11-2021 at 12:31

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra MR F75 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MR F75 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info