538286

Cobra MR F75 Manual

32
Zoom out
Zoom in
Previous page
1/40
Next page
Nothing comes close to a Cobra
®
DSC Operation
59
Sending An All Ships Calls
A DSC All Ships call is used for the same urgency and safety purposes as the Pan
and Securite voice calls as well as to send routine messages to all stations at once.
It will reach all stations within range of your radio. If you have an urgent, but not
life-threatening, situation or a safety warning to broadcast to all vessels in your
area, this is the type of call to use. It should be used judiciously for routine calls.
To Send An All Ships Call:
1.
In Standby mode, select a channel on which you want
to communicate for a routine call. (The radio will use
Channel 16 for urgent and safety calls.)
2. Press the Call/Set button to enter the Call Send menu.
3. Use the Up/Down buttons to scroll to ALLSHIPS.
4. Press the Call/Set button to move to the message
type menu.
5. Use the Up/Down buttons to select a message type
— URGENCY, SAFETY or ROUTINE.
6. Press the Call/Set button to send the message.
7. Depending on the type of message you chose,
the radio will automatically switch to a voice channel.
a. After urgency and safety calls, the radio will switch
to Channel 16 and wait for you to press the Talk button
to send the urgent or safety message by voice.
b. After a routine call, the radio will switch to the channel
you selected in step 1 and wait for you to press the
Talk button to send the routine message by voice.
DSC equipped radios that receive your message will be
automatically switched to Channel 16 or the channel you
selected to hear your voice message.
To return to
Standby mode without sending a message,
use the Up/Down buttons to scroll to EXIT and
press the Call/Set button.
All Ships
Standby Mode
Urgency/Safety/Routine
Operating Your Radio
Urgency Waiting
Routine Waiting
58
English
DSC Operation
Receiving Distress Calls
If your vessel is within range of a DSC Distress call, the radio will
receive the call, sound the distress alarm, and switch to Channel 16.
When A Distress Call Is Heard:
1.
Press any button to turn Off the alarm and return
to Standby mode.
2. Read and write down the distress information on the
LCD (there may or may not be position data shown),
then determine whether you should answer the call.
3. Respond, if appropriate, by pressing and holding
the Talk button to transmit on Channel 16.
NOTE
Your radio will automatically switch to Channel 16
upon receiving a DSC distress call.
Regarding Distress Relay Calls
Your radio cannot send Distress Relay calls. Only large ships and
shore stations with specially equipped radios can send these calls.
Receiving Distress Relay Calls
Your radio will respond to a received Distress Relay call in the same way
as it will to a distress call.
Operating Your Radio
Distress Info on LCD
Distress Info on LCD
… 32 …


Need help? Post your question in this forum.

Forumrules
1

Forum

cobra-mr-f75

Reset search

  • Anyone knows the pinout if the 7 pins connector of the microphone
    Submitted on 25-11-2021 at 12:31

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra MR F75 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MR F75 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info