538286
30
Zoom out
Zoom in
Previous page
1/40
Next page
Nothing comes close to a Cobra
®
DSC Set-Up
55
4. Press the Call/Set button to select the memory location.
The cursor will begin to blink at the first character under
NAME.
5. Use the Up/Down buttons to scroll through the character list.
6. Press the Call/Set button to select a character. This will also
move the blinking cursor to the next character under NAME.
7. Repeat steps 5 and 6 to enter additional characters —
up to a maximum of nine (9) — for the name.
NOTE
Press the High/Low Power button to backspace
and erase the last selected character.
8. After entering the name, press and hold the Call/Set
button to move the blinking cursor to the first character
under MMSI.
9. Use the Up/Down buttons to scroll through the number list.
10. Press the Call/Set button to select the number and
move the cursor to the next character under MMSI.
11. Repeat steps 9 and 10 until the nine (9) digit
MMSI is entered.
12. Press and hold the Call/Set button to move to the
next memory location or exit.
13. Select NEXT or EXIT with the Call/Set buttons.
If
NEXT is selected, pressing the Call/Set button will
move to the next memory location where another
name can be entered by repeating steps 3 through 11.
If EXIT is selected, pressing the Call/Set button
will return you to the Settings menu.
You can enter a total of ten (10) names and MMSI
numbers in the directory.
Enter MMSI
Operating Your Radio
Ne
w Individual
Ne
xt/Exit
Position Request Reply Type
The ability to send your position to another station is an added feature of DSC
radios that have GPS attached. It is handy for rendezvous and rescue situations.
Your CobraMarine
VHF radio allows you to choose whether to have the radio
automatically respond to all Position Requests it receives or to alert you to a
Position Request and allow you to choose whether to respond or not —
manual reply.
To Set The Position Request Reply Type:
1.
Enter the Settings menu and scroll to
POS RPLY (position reply) with the
Up/Down buttons.
2. Press the Call/Set button and observe
the current setting — AUTO or MANUAL.
3. Use the Up/Down buttons to change the setting.
4. Press the Call/Set button to select the setting.
5. Use the Up/Down buttons to scroll to EXIT.
6. Press the Call/Set button to return to the
Settings menu.
Individual Directory
DSC calling allows you to call another vessel or station directly if you know its
MMSI number. Your CobraMarine
VHF radio allows you to store up to ten (10)
names and their associated MMSI numbers for quick access.
To Enter Or Edit Names And MMSI Numbers
In The Directory:
1.
Enter the Settings menu and scroll to INDV DIR
(individual directory) with the Up/Down buttons.
2. Press the Call/Set button to enter a
memory location (1-10).
3. Use the Up/Down buttons to scroll through the
memory locations to one you want to select.
54
English
DSC Set-Up
Operating Your Radio
Auto/Manual/Exit
Position Reply
Location 01
Individual Director
y
30


Need help? Post your question in this forum.

Forumrules
1

Forum

cobra-mr-f75

Reset search

  • Anyone knows the pinout if the 7 pins connector of the microphone
    Submitted on 25-11-2021 at 12:31

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra MR F75 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MR F75 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info