538286

Cobra MR F75 Manual

28
Zoom out
Zoom in
Previous page
1/40
Next page
Nothing comes close to a Cobra
®
DSC Set-Up
51
To Enter Your MMSI Number:
1.
Enter the Settings menu and scroll to USERMMSI
with the Up/Down buttons.
2. Press the Call/Set button and the blinking cursor will
appear at the first digit under USER MMSI ID ENTRY.
3. Use the Up/Down buttons to scroll through the number
list to that digit of your number.
4. Press the Call/Set button to select the digit and the
blinking cursor will move to the next digit of the number.
5. Repeat steps 3 and 4 until all nine (9) digits of your
MMSI number are entered.
NOTE
Press the High/Low Power button to backspace
and erase the last selected number.
6. Check that you have entered the number correctly.
7. Press and hold the Call/Set button to return to the
Settings menu.
If You Incorrectly Enter Your MMSI Number
You can repeat steps 1 through 7 to correct it. HOWEVER,
YOU CAN DO THIS ONLY ONCE! A third attempt to enter
an MMSI number will result in an error message as shown.
Pressing the
Call/Set button from the error message
will return the radio to the Settings menu.
Once the error message appears, the radio will still
operate in all non-DSC modes. But you will have to
return the radio to Cobra
®
Electronics (see product
service on page 73 for details) for reset before you
can enter your MMSI number and use the radio in
DSC mode.
Because the MMSI number is so important to DSC
operation, this limitation is imposed on all DSC capable
radios to prevent constant changes and the potential
introduction of errors in the process. If, for any reason,
it is necessary to change the MMSI number in the radio
more than once, you can return it to Cobra
®
Electronics
for reset.
Operating Your Radio
User MMSI ID
Entry
Err
or Messa
g
e
Call/Set Button
User MMSI
50
English
DSC Set-Up
DSC Set-Up
•
Digital selective calling — DSC — employs digital RF signals which tend to carry
further and be less susceptible to distortion from noise and atmospheric conditions
than analog ones. The result is greater range and more reliable message delivery
per watt of output power.
But, that is not the only advantage of DSC equipped radios. Those radios are set up
to interface with GPS and to automate many of the operations involved in sending
and receiving messages. That results in more compact and accurate messages and
less congestion of the airwaves.
The price of these benefits to the user is the time it takes to do the required set-up
to make the DSC features work. A little time spent when your radio is new will pay
dividends over its life.
These procedures use the
Settings menu. Refer to page 38 for information on
entering and exiting the
Settings menu.
User MMSI Number
This nine (9) digit number is similar to a telephone number in that it is a unique
identifier for you and your vessel. DSC uses this number in every message it
sends and receives. That is why your radio will not operate in the
DSC mode
until you enter your MMSI Number. You should enter it as soon as you receive
it from one of the issuing agencies listed on page 9.
Operating Your Radio
… 28 …


Need help? Post your question in this forum.

Forumrules
1

Forum

cobra-mr-f75

Reset search

  • Anyone knows the pinout if the 7 pins connector of the microphone
    Submitted on 25-11-2021 at 12:31

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra MR F75 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MR F75 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info