538286
27
Zoom out
Zoom in
Previous page
1/40
Next page
Nothing comes close to a Cobra
®
Advanced Operation
49
NOTE
If there are fewer than two (2) channels tagged,
the Memory Scan mode will not be available.
[See page 48 under program memory channels
to tag at least two (2) channels.]
NOTE
The radio must be squelched for the Memory Scan
mode to function. See page 36 for squelch procedure.
To Enter Memory Scan:
1.
From Standby mode, press the Memory Scan/
Memory Clear button.
The radio will immediately begin to scan the channels you
tagged.
MEM SCAN (memory scan) will show on the LCD.
To Exit Memory Scan:
1.
From Memory Scan mode, press the Memory
Scan/Memory Clear button.
This will return the radio to
Standby mode on the last
scanned memory location.
During Memory Scan (while receiving an incoming
transmission), You Can Choose From The Following:
a.
Press the Talk button to remain on that memory
location and end scanning. This will return the radio
to
Standby mode.
b. Press the Up/Down buttons to resume scanning.
If you do not press any buttons within ten (10) seconds,
your radio will automatically resume scanning.
During Memory Scan (while not receiving a transmission):
a.
Press the Talk button to communicate on the last
channel scanned and return to Standby mode.
Operating Your Radio
Standby Mode
Memory Scan/
Clear Button
Memor
y Channel
48
English
Advanced Operation
Memory Channels
You can program (or tag) any or all channels to be scanned in the Memory
Scan mode.
To Program Memory Channels:
1.
From Standby mode, select a channel to be tagged using
the Up/Down buttons.
2. Press and hold the Memory Scan/Memory Clear button
for three (3) seconds. The channel will be tagged for
scanning and
MEM (memory channel) will appear on
the LCD whenever that channel is selected.
The radio will return to
Standby mode as soon as the
Memory Scan/Memory Clear button is released.
Repeat steps 1 through 2 to tag as many channels
as you wish.
To Clear Memory Channels:
1.
From Standby mode, select a channel to be cleared
from a memory tagging using the Up/Down buttons.
2. Press and hold the Memory Scan/Memory Clear
button for three (3) seconds. The channel will be
untagged and MEM (memory channel) will no longer
appear on the LCD whenever that channel is selected.
The radio will return to
Standby mode as soon as
the Memory Scan/Memory Clear button is released.
Repeat steps 1 through 2 to clear additional channels
from memory locations.
Memory Scan
During Memory Scan, the radio will rapidly switch from
tagged channel to tagged channel. Whenever any activity is
detected, the radio will stop the scan for ten (10) seconds to
allow you to listen briefly on that channel. It will then continue
to scan unless you switch out of the
Memory Scan mode.
Operating Your Radio
Memory Channel
Standby Mode
88
30
60
75
Scanning
Memory Scan/
Clear Button
27


Need help? Post your question in this forum.

Forumrules
1

Forum

cobra-mr-f75

Reset search

  • Anyone knows the pinout if the 7 pins connector of the microphone
    Submitted on 25-11-2021 at 12:31

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra MR F75 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MR F75 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info