538286
37
Zoom out
Zoom in
Previous page
1/40
Next page
Nothing comes close to a Cobra
®
DSC Operation
69
Call Waiting
Call Waiting functions similarly to the caller ID function on your telephone.
It will capture the caller’s MMSI identification number and any other data
included in a DSC message.
NOTE
The call waiting memory can hold up to 20 messages. Once the memory
becomes full, each new call will erase the oldest call information on a
first-in first-out basis.
To Review Call Waiting Messages Received
While In DSC Standby Mode:
1.
From Standby mode, press the Call/Set button
to enter the Call Send menu.
2. Use the Up/Down buttons to scroll to CALLWAIT
(call waiting).
3. Press the Call/Set button to enter the Call Waiting mode.
NOTE
The fourth line will show the type of message.
4. Use the Up/Down buttons to move from message
to message in the call waiting memory.
5. Press the Call/Set button to return to Standby mode.
To Clear Messages From The Call Waiting Memory:
1. From Standby mode, press the Call/Set button
to enter the Call Send menu.
2. Use the Up/Down buttons to scroll to CALLWAIT
(call waiting).
3. Press the Call/Set button to enter the Call Waiting mode.
NOTE
The fourth line will show the type of message.
4. Use the Up/Down buttons to select the message
you want to delete.
5. Press and hold the Memory Scan/Memory Clear button
for one (1) second or more.
Repeat steps 4 through 5 to delete additional messages.
6. Press the Call/Set button to return to Standby mode.
Operating Your Radio
Call Waiting
Standby Mode
Reviewing Messages
68
English
DSC Operation
Operating Your Radio
Receiving A Position Send
When another station sends you its position in
Position Send mode, the individual alarm will sound
and the station’s name and position will be shown
on the LCD. Press any button to turn
Off the alarm
and return to Standby mode.
Standby Mode Signal
If you will be away from your radio or otherwise unable to answer calls,
you can put the radio into DSC Standby mode. When in DSC Standby mode,
your radio will log all calls received into its call waiting memory and respond
automatically to individual calls with an
UNATTENDED message. You will
then be able to retrieve those calls from the call waiting memory.
NOTE
The call waiting memory can retain up to twenty (20) calls.
See the following section for information on call waiting.
To Enter Standby Mode:
1.
From Standby mode, press the Call/Set button to
enter the Call Send menu.
2. Use the Up/Down buttons to select STANDBY.
3. Press the Call/Set button to enter DSC Standby mode.
The radio will then remain in DSC
Standby
mode until you exit from that mode.
To Exit DSC Standby Mode:
1.
From DSC Standby mode, press the Call/Set
button to return the radio to Standby mode.
Standby Mode
Standby Mode
DSC Standby Mode
P
osition Send
37


Need help? Post your question in this forum.

Forumrules
1

Forum

cobra-mr-f75

Reset search

  • Anyone knows the pinout if the 7 pins connector of the microphone
    Submitted on 25-11-2021 at 12:31

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra MR F75 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MR F75 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info