634449
9
Zoom out
Zoom in
Previous page
1/10
Next page
Electric motor performance P = 1500 W S3 (8 mi
n/2 min)
50 – 250 mm
520
Problem possible cause remedy
Logs are not bein
g split properly
(insufficient splitting performance)
The log is not positioned correctly
The log exceeds the maximum
dimensions or the wood is too hard for
the performance of the machine
The splitting wedge is not working
properly
Oil leak
Hydraulic pressure too low
Incorrect connecting lead (longer than
10 m or too small cable cross-section)
Reposition the log correctly
Cut the log to the required dimensions
Sharpen the splitting wedge, and check
for any burrs or notches
Place a sheet of cardboard under the
log splitter in order to locate the leak.
To correct the problem, refer to the
manufacturer.
Check the oil level and add more oil if
necessary.
If the problem cannot be rectified, refer
to the manufacturer.
Use the correct connecting lead
Log ram travels out je
rkily or under heavy
vibration
Air in the circui
t Open the bleed screw
Check the oil level and add more oil if
necessary.
If the problem cannot be rectified, refer
to the manufacturer.
Log ram will not move out
Hydrau
lic pump defective To correct the problem, refer to the
manufacturer.
Motor will not start
No electrical powe
r
Connection cable defective
Electric motor defective
Check the fuse (13A).
Replace the connection cable or have it
checked by an electrician.
To correct the problem, refer to the
manufacturer.
Oil leak at the dipstick
Oil seal at the dipstick not s
ealin
g Replace the oil seal.
T
T
e
e
c
c
h
h
n
n
i
i
c
c
a
a
l
l
d
d
a
a
t
t
a
a
Name
Model
Splitting force
Log length 520 mm
Log diameter
Stroke
Power supply 230 V ~ 50 Hz
Rev
o
l
u
ti
ons 28
20 r
pm
8
LS520H -LS520D
50kN(5T)
COBRA LS520H
T
Trouble Shooting
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra LS520D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra LS520D in the language / languages: English as an attachment in your email.

The manual is 17,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info