634449

Cobra LS520D Manual

8
Zoom out
Zoom in
Previous page
1/10
Next page
Fig. 9
Fig. 10
When should I chan
ge the oil?
The first oil change should be carried out after 50
operating hours, and then every
250 operating hours.
Changing the oil:
1. The log r
am must be in its starting position.
2. Place a container under the log splitter to catch the old oil.
The container should have a capacity of at least 4 litre
s.
3. Unscrew the dipstick. Do not drop or lose the oil seal when
removing the dipstick.
4. Now tip the machine to empty the oil into the container.
5. Stand the log splitter on end, with the filler opening at the
top. Fig 9.
A second person will be required to up-end and
hold the log sp
litter.
6. Pour in the new hydraulic oil (3.2 litres) using a clean
funnel.
7. Clean the dipstick and the oil seal.
8. Check the oil seal and replace it if it is damaged in any
way.
9. Replace the dipstick and screw it firmly into place.
Caution! Do not tighten the screw too tightly, since this may
damage the oil seal or the thread in the cylinder cove
r.
Dispose of the old oil properly (local oil disposal
point). The old oil must not be poured into the
ground or drainage system, or mixed with other
waste.
L
Hydraulic oil
We reco
mmend the following hydraulic oils for the hydraulic
cylinder:
¾ Shell Tellus T 22
¾ Aral Vitam Gf 22
¾ BP Energol HLP 22
¾ Mobil DTE 11
¾ or equivalent
Do not use any other types of oil. The use of any other
type of oil will adversely affect the operation of the
hydraulic cylinder.
G
G
u
u
a
a
r
r
a
a
n
n
t
t
e
e
e
e
This product is warranted in accordance with legal regulations for a
24 month period effective from the date of purchase by the first
user. This product will not be covered if used in a commercial
application. This warranty covers all material or production failures,
it does not include: defects from normal wear and tear, parts such
as, bearings, brushes, cables, brake pad, clutch disc, tyre, wheel,
belts, cutter blades, lubricant oils and grease or accessories.
Damage or defects resulting from abuse, accidents or alterations,
natural fading of painted or plated surfaces, sheet peeling and
other natural deterioration.
Any damage that occurs from the use of non-genuine Cobra parts
will not be covered. We reserve the right to reject any claim where
the purchase cannot be verified or when it is clear that the product
was not maintained properly. (Clean ventilation slots, carbon
brushes and serviced regularly) Expenses incidental to the
warranty claim that are not covered. Any damage resulting from
operating methods other than those indicated in the owner’s
manual will not be covered.
Dipstick
7
… 8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra LS520D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra LS520D in the language / languages: English as an attachment in your email.

The manual is 17,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info